欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Today’s heat treatment processes we share include: quenching, tempering, nitriding, cryogenic, oxidation and other processes. So what do these processes mean?

quench

s?ndürme nedir?

After austenitizing, the steel is cooled at an appropriate cooling rate to make martensite and other unstable structural transformation occur in the whole or a certain range of the cross section of the workpiece.

What's Differences between the Main Five Hot Processing Methods 2

Purpose of quenching

1) Improve the mechanical properties of metal products or parts. For example: improve the hardness and wear resistance of tools and bearings, improve the elastic limit of springs, and improve the comprehensive mechanical properties of shaft parts.

2) Baz? ?zel ?eliklerin malzeme ?zelliklerini veya kimyasal ?zelliklerini iyile?tirin. Paslanmaz ?eli?in korozyon direncini geli?tirmek ve manyetik ?eli?in kal?c? manyetizmas?n? art?rmak gibi.

tempering

temperleme nedir?

The quenching workpiece is heated to an appropriate temperature below the critical point AC1 for a certain period of time, and then cooled by a satisfactory method to obtain the required microstructure and properties

What's Differences between the Main Five Hot Processing Methods 3

What is the purpose of tempering?

1) To reduce the internal stress and brittleness, there is a great deal of stress and brittleness in the quenched parts. If it is not tempered in time, it will produce deformation and even cracking.

2) ?? par?as?n?n mekanik ?zelliklerini ayarlay?n. S?ndürme i?leminden sonra i? par?as? yüksek sertli?e ve k?r?lganl??a sahiptir. ?e?itli i? par?alar?n?n farkl? performans gereksinimlerini kar??lamak i?in sertlik, mukavemet, plastisite ve tokluk temperleme ile ayarlanabilir.

3) Stable workpiece size. By tempering, the metallographic structure tends to be stable, so as to ensure that no deformation will occur in the future.

4) The machinability of some alloy steels is improved.

nitridation

What is nitriding?

Nitriding treatment is a kind of chemical heat treatment process in which nitrogen atoms penetrate into the surface of workpiece in a certain medium at a certain temperature.

What is the purpose of nitriding?

The product has excellent wear resistance, fatigue resistance, corrosion resistance and high temperature resistance. Nitriding treatment is a kind of chemical heat treatment process in which nitrogen atoms penetrate into the surface of workpiece in a certain medium at a certain temperature.

Deep cold

What is deep cold?

Cryogenic treatment is to place the metal in – 160 ° The soft retained austenite is almost completely transformed into high strength martensite by treatment below C.

The purpose of deep cold?

Eliminate retained austenite (the retained austenite is about 8-20% after quenching and tempering, because the austenite is very unstable, it is easy to transform into martensite when it is subjected to external force or environmental temperature change, and the volume of martensite is larger than austenite, which will cause irregular expansion of the material and reduce the dimensional accuracy of the workpiece). After deep cooling, the retained austenite is reduced to less than 2%, which reduces the residual stress It makes the metal matrix more stable, increases the strength and toughness of the metal material, and significantly improves the red hardness.

oxidation

What is oxidation?

Dense and protective oxide film is formed on the surface of iron and steel parts by oxidation treatment. The main component is magnetic iron oxide (Fe3O4), which has the function of anti adhesion. The FES film obtained by surface vulcanization can have the function of anti-wear and anti adhesion. At the same time, it can improve the corrosion resistance and high temperature oxidation resistance.

What is the difference between different processes and workpieces?

Do you think the above technologies are not clear enough? So, the small Olympics will show you intuitively what are the differences in the appearance of different processes?

Quenching and temperingWhat's Differences between the Main Five Hot Processing Methods 4

What's Differences between the Main Five Hot Processing Methods 5

The color is gray cyan

Deep cold

There is frost on the surface, so hands can’t touch it directly

nitridationWhat's Differences between the Main Five Hot Processing Methods 6

What's Differences between the Main Five Hot Processing Methods 7

The surface is white and gray

It can be seen intuitively from the picture that firstly, the color of the workpiece will change, and secondly, the process is inseparable. If a workpiece needs higher hardness, it can be achieved by heat treatment.

For example, a mold can only be made of 10000 samples, but now it can be made of 100000 or even 1000000 samples by heat treatment, which greatly improves the utilization rate.

Bir cevap yaz?n

E-posta hesab?n?z yay?mlanmayacak. Gerekli alanlar * ile i?aretlenmi?lerdir

无码人妻精品一区二区三区蜜桃| 看女生b免费视频| 一色道久久88加勒比一| 白虎美女被大基吧操| a一级毛片免费高清在线| 亚洲精品伦理熟女国产| 好爽轻点太大了太深了视频| 被公侵犯人妻少妇一区二区三区| 日韩美女在线视频一区不卡| 小嫩骚逼操死你视频| 一区二区三区av精品| 有关日本黄色录像的视频| 两个人免费视频高清| 啊啊好想被大鸡巴操视频| 亚洲av午夜一区二区| 国产乱精品一区二区三区视频了| 92婷婷伊人久久精品一区二区| 日韩av午夜福利在线观看| 国产亚洲一区白丝在线观看| 又爽又粗又大又长的爆草| 看女生b免费视频| 爆乳喷奶水无码正在播放| 一区亚洲免费二区| 国产午夜爽爽爽男女免费动漫AV| 五月天国产成人免费视频| 中文字幕人妻一区二区三区人妻| 中日美女毛5片一区二区三区| 黑人大鸡把操逼视频| 性色av少妇一区二区三区多人| 啊啊啊好疼视频进来| 91久久高清国语自产拍| 国产妇女乱一性一交| 国产美女色诱视频又又酱| 日本十八禁大骚逼| 这里只有久久精品| 欧美大鸡巴操穴日韩| 国产品无码一区二区三区在线| 无码人妻丰满熟妇区精品| 久久久一区二区三区日本| 中文无码av动作片| 精品久久久久中文字幕人|