欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

The end mill cutter, which is the most commonly used milling cutter on CNC machine tools, has cutting edges on both the cylindrical surface and the end face. It can perform simultaneous or separate cutting operations. It is mainly used for flat milling, groove milling, step surface milling, and contour milling.

Flute number

The number of cutting edges on an end mill cutter mainly includes 2-flute, 3-flute, 4-flute, 6-flute, and other types. The number of flutes is related to the size of the chip pocket area for collecting the chips. The chip pocket is a groove for temporarily storing the chips. If we consider the rotating cylindrical profile of the end mill cutter as 100%, the chip pocket areas for various numbers of flutes are shown in the diagram below.

freze

Proportion of the cross-sectional area of the chip holding tank

As the number of flutes increases, the chip pocket area gradually decreases while the cutting edge area increases, leading to improved rigidity. The characteristics and applications of an milling cutter depend on the number of flutes. (Refer to the table below)

What are the 7 Important Parameters of an End Mill Cutter? 2

Characteristics and applications of end mills with various blade numbers

Cutting edge length

When installing an mill cutter on a tool holder for machining, deflection as shown in the diagram can occur due to cutting resistance. The deflection is directly proportional to the cutting resistance and, more specifically, proportional to the cube of the length (overhang) from the end mill cutter to the tool holder.

What are the 7 Important Parameters of an End Mill Cutter? 3

Deflection of end milling cutter

To improve the perpendicularity of the machined surface, which refers to the surface deformation of the machined surface, it is necessary to reduce deflection. This can be achieved by minimizing the overhang of the mill cutter, which means using an end mill cutter that is slightly longer than the length of the machining portion.

Therefore, the cutting edge length of a mill cutter is generally categorized as follows:

a.Extra-short

b. Short

c. Medium

d. Medium-long

e. Long

f. Extra-long

 

helix angle

The spiral direction of an end mill cutter is generally right-hand spiral. When using it, the rotation is in a clockwise direction when viewed from the installation side (the side of the tool holder) – this is referred to as right-hand rotation. Cutting tools that rotate in a right-hand direction are called right-hand tools, while those that rotate counterclockwise (left-hand rotation) are called left-hand tools. The mill cutters discussed in this chapter are right-hand tools with a right-hand spiral.

What are the 7 Important Parameters of an End Mill Cutter? 4

 

Left Blade Left Spiral Left 30 ° and Right Blade Right Spiral Left 30 °

The helix angle of a mill cutter is generally 30°. A smaller helix angle results in poorer cutting sharpness, while a larger helix angle provides better cutting sharpness. However, increasing the helix angle can also increase the axial force in the direction of tool retreat, which may lead to tool dislocation. The characteristics and applications of end mill cutters with different helix angles are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 5

Table of Characteristics and Applications of End Mills with Different Helical Angles

Peripheral blade

The shapes, types, and characteristics of peripheral edge end mill cutters are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 6

The shape of the outer edge

What are the 7 Important Parameters of an End Mill Cutter? 7

Right angle and spiral flute

u? kesme kenar?

The shapes, types, and characteristics of the bottom edge of a mill cutter are shown in the table below. The center cutting edges include shapes with long and short cutting edges (shown as A and C in the table) as well as twisted core shapes (shown as B in the table). They can all be used for axial feed cutting.

What are the 7 Important Parameters of an End Mill Cutter? 8

The purpose of each shape of end milling cutter

Hilt? of end mill

The shapes, types, and characteristics of the shank of an end mill cutter are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 9

Tool handle shape

The shapes, types, and characteristics of the neck of an end mill cutter are shown in the table below:

Bir Parmak Frezenin 7 ?nemli Parametresi Nedir? 10

The shape of the handle and neck of the knife

Bir cevap yaz?n

E-posta hesab?n?z yay?mlanmayacak. Gerekli alanlar * ile i?aretlenmi?lerdir

加勒比五月综合久久伊人| 九九视频免费在线观看| 又爽又粗又大又长的爆草| 国产亚洲一区二区手机在线观看| 无码一区二区三区色哟哟| 伊人久久综合无码成人网| 日本高清不卡一区二区三区| 中国毛茸茸的操逼| 美性中文网中文字幕91| 人人妻人人澡精品99| 亚洲一级片在线播放| 在线观看国产日韩欧美一区二区| 亚洲精品成a人在线观看| 大鸡巴插美女小逼逼| 波多野吉衣一区在线观看| 黑人巨茎和中国美女视频| 亚洲欧美一区二区三区孕妇| 国产高清乱码女大生AV| 夜夜嗨av少妇一二三区| 午夜国产精品午夜福利网| 欧美日本大白屁股大黑逼操逼视频| 日韩素人精品亚洲热一区| 亚洲国产一区二区不卡在线资源| 黄色视频网在线观看| 久久久久黑人强伦姧人妻| 被医生添奶头和下面好爽| 老熟妇高潮一区二区高清视频| 啊啊啊好爽高潮啦| 夜色成人免费观看| 美女亚洲福利视频| 综合伊人久久在一二三区| 熟妇女人妻丰满中文字幕| 国产精品午夜小视频观看| 亚洲二亚洲欧美一区vr| 精品国产自在现线看| 国产在线麻豆精品| 国产中文字幕在线一区二区三区| 美女玩奶子和鸡巴| 男人的天堂日本在线观看| 91久久高清国语自产拍| 美女嫩逼插进大屌|