欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

To know carbide milling cutters, it is important to know what carbide is. carbide is a powder metallurgy product made by sintering micro-powders of carbides (such as WC and TiC) of refractory metals with high hardness, using cobalt (Co) or nickel (Ni) and molybdenum (Mo) as binders in a vacuum furnace or hydrogen reduction furnace.

 

Selection of carbide milling cutter materials

Except for end mills and some face mills, which use carbide?as the tool material, other types of milling cutters mostly use high-speed steel, especially tungsten-molybdenum series and high-vanadium high-speed steel, which have good performance. The tool durability can be improved by 1 to 2 times compared with W18Cr4V. The Chinese carbide?grades suitable for making milling cutters include YG8, YW2, YS2T, YS30, YS25, etc. Friends who are not familiar with Chinese grades can check the corresponding table between Chinese carbide?grades and international grades.

 

Classification of milling cutters.

Cylindrical? milling cutters

They are used for machining surfaces on horizontal milling machines. The teeth are distributed on the circumference of tool and are divided into straight teeth and spiral teeth according to their shapes. According to the number of teeth, they are divided into coarse teeth and fine teeth. Spiral coarse-tooth milling cutters have fewer teeth, high tooth strength, and large chip space, and are suitable for rough machining. Fine-tooth milling cutters are suitable for precision machining.

cylindrical milling cutter

Face milling cutter

It’s used for machining surfaces, end faces, and circumferences on vertical milling machines, end milling machines, or gantry milling machines. There are teeth on both the end face and circumference, and they can be divided into coarse teeth and fine teeth. Its structure includes three types: integral type, insert type, and indexable type.

6 Types of milling cutters and To-knows about them 1

End milling cutter

It’s used for machining grooves and stepped surfaces, etc. The teeth are on both the circumference and end face, and the tool cannot be fed axially during operation. When there is an end tooth passing through the center of the vertical type cutter, axial feeding is possible.

carbide mill cutter

Three-edge milling cutter

It’s used for machining various grooves and stepped surfaces, with teeth on both sides and circumference.

6 Types of milling cutters and To-knows about them 2

Chamfer milling cutter

It’s used for milling grooves at a certain angle, with two types of single-angle and double-angle milling cutters.

6 Types of milling cutters and To-knows about them 3

Saw blade milling cutter

It’s used for machining deep grooves and cutting workpieces, with more teeth on the circumference. In order to reduce friction during milling, there is a secondary relief angle of 15’~1° on both sides of the teeth. In addition, there are keyway type cutters, dovetail slot cutters, T-slot cutters, and various shaping milling cutters.

6 Types of milling cutters and To-knows about them 4

Main milling methods

There are two main types of milling methods for milling cutters in relation to the feed direction of the workpiece and the rotation direction of milling cutter:

The first is climb milling, in which the rotation direction of the milling cutter and the feed direction of the cutting are the same. When cutting starts, this type of tools bite into the workpiece and cuts the final chips.

The second is conventional milling, in which the rotation direction of the cutter and the feed direction of the cutting are opposite. The tool must slide on the workpiece before cutting starts, with the cutting thickness starting at zero and gradually increasing until the end of cutting.

During climb milling, the cutting force presses the workpiece against the worktable, while during conventional milling, the cutting force lifts the workpiece off the worktable. Since climb milling produces the best cutting effect, it is usually preferred. Only when there is a problem with backlash in the machine tool or when climb milling cannot solve the problem should conventional milling be considered.

For example, when milling stainless steel, climb milling should be used as much as possible. Asymmetric climb milling ensures that the cutting edge smoothly cuts away from the metal, reducing the contact area of the chips. Therefore, climb milling can reduce the occurrence of chipping and edge wear on the front cutting edge, improving the durability of the milling cutter.

Maintenance of? Milling Cutters

When the axis of the milling cutter coincides with or approaches the edge of the workpiece, the situation will be very serious, and the operator should do relevant equipment maintenance work:

1Check the power and stiffness of the machine tool to ensure that the required cutter diameter can be used on the machine tool.

The overhang of the tool on the spindle should be as short as possible to reduce the impact of the position of the cutter axis and the workpiece on the shock load.

2Use the correct cutter tooth pitch suitable for the process to ensure that there are not too many blades engaged with the workpiece at the same time during cutting, and ensure that there are enough blades engaged with the workpiece when milling narrow workpieces or milling cavities.

3Ensure that the feed rate of each blade is adopted so that the correct cutting effect can be obtained when the chip thickness is sufficient, thereby reducing tool wear. Use a positive front angle groove-shaped indexable insert to obtain smooth cutting effects and the lowest power.

4Choose cutter diameter suitable for the width of the workpiece.

5Choose the correct main angle.

6Place the cutter correctly.

7Use cutting fluid only when necessary.

8Follow the rules of tool maintenance and repair, and monitor tool wear.

Bir cevap yaz?n

E-posta hesab?n?z yay?mlanmayacak. Gerekli alanlar * ile i?aretlenmi?lerdir

操鸡巴奶子在线观看| 大鸡巴射在穴穴里的视频| 日韩精品人妻一区二区免费| 在线免费观看一区| 亚洲欧美日韩清纯唯美第一区| 9999热精品免费视频| 日本一区二区不卡在线国产| 日韩有码一区二区三区在线观看| 青春草在线视频观看| 美国业余自由摘花管| 国产午夜久久精品一区四虎| 爆乳喷奶水无码正在播放| 中文国产成人精品久久久| 蜜桃av噜噜一区二区三区免费| 日本不卡高清视频在线播放| 精品精品视频国产| 午夜场射精嗯嗯啊啊视频| 插女人下面高潮视频| 国产污污污在线观看视频| 久久久久久高清无码视频| 粗大长内射女人视频| 亚洲欧洲综合成人综合网| 三上悠亚精品一区二区久久| 日本乱人伦中文在线播放| 日本免费暖暖在线小视频| 天天日天天干天天天天操| 日韩素人精品亚洲热一区| 欧美亚洲综合久久夜夜嗨| 亚洲精品国产综合一线久久| 国产综合精品一区二区青青| 韩国精品视频一区二区在线观看| 国产精品无码av在线一区| 粉嫩小穴被大鸡巴操视频在线观看| 中国老女人 操逼 视频| 亚洲狠狠插狠狠搞狠狠摸| 大肌巴日小个子女人视频| 久久无码免费视频| 女人逼逼出水视频| 白色紧身裤无码系列在线| 久久久中文字幕一区| 欧美日韩久久一区二区三区|