欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Cemented carbide is a kind of alloy material prepared by powder metallurgy process using hard compounds of refractory metals such as tungsten carbide (WC) or other MC type carbides and bonding metals. The bonding metals are mainly cobalt based, nickel based and iron-based.

Metallographic Preparation

Generally, high-power precision cutting machine and diamond cutting blade (20lc) are used for cemented carbide sampling. Due to its own hard characteristics, the cutting surface flatness is very good, and rough grinding steps are usually not?required.

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 1

The removed samples usually need to be inlaid before grinding and polishing. In the inlay, we recommend to use the hot inlay epoxy resin added with mineral or glass powder. If cold inlay must be used under some special conditions, we also need to add reinforced ceramic powder to the resin to improve the hardness of the resin.

For the grinding of cemented carbide, silicon carbide abrasive paper is powerless, so a specific diamond grinding disc must be selected. When the amount of material removed by grinding is large, we can use resin bonded disc or 45 μ M metal bonding plate as the first step of grinding. When the cutting surface is smooth and smooth, and there is no need to remove the material, we can also choose hard grinding disc with rough polishing of diamond suspension as the first step.

Method 1

steps1234
SurfaceDGD Mosaic/DGD UltraUltrapadVenduTexMicroCloth
granule45um9um3um1um
lubricantwaterWaterMetadi fluidMetaldi fluid
force30N30N30N30N
TimeUntil surface being flattened5mins3mins2mins
Rotation velocity(rpm)200150150150

Method 2

steps1234
SurfaceApexhercules HApexhercules HVenduTexMicroCloth
granule45um9um3um1um
lubricantMetadi fluidMetadi fluidMetadi fluidMetaldi fluid
force30N30N30N30N
TimeUntil surface being flattened5mins3mins2mins
Rotation velocity(rpm)150150150150

?three μ Metallographic photos of polished m diamond

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 2

?one μ Metallographic photos of polished m diamond

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 3

?After 0.05 μ m alumina polishing

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 4

?Metallographic photos before vibration polishing

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 5

Finally, if the silica gel or alumina suspension is used for polishing, the clear structure will be obtained, which is also related to the hardness difference between the matrix and the hard phase. When the surface has multi-layer wear-resistant coating, the final oxide polishing can also increase the contrast between the coating and the substrate. When the surface coating needs EBSD sample preparation, vibration polishing will also make the hard phase transformation of the substrate prominent.

Hardness test

Rockwell hardness test

(A) Scale test method

1. sample preparation and requirements

Roughness of test surface of sample RA ≤ 2 μ m。 The thickness of the sample surface in sintered state shall not be less than 0.2mm.

Sample preparation shall be carried out in a way that minimizes the change of surface properties caused by overheating or quenching due to processing

When determining the hardness of the sample with curved surface, the radius of curvature shall not be less than 15mm. In order to determine the hardness of specimens with radius of curvature less than 15mm, a plane at least 3MM WIDE shall be prepared.

The thickness of the prepared specimen shall be at least 1.6mm.

The specimen surface under the action of diamond indenter shall be parallel to the bearing surface, and its parallelism shall not exceed 0.1mm per 10mm length.

2. equipment

The measurement accuracy of the test equipment shall not be less than 0.2hra.

The diamond indenter shall comply with the relevant provisions of gb/t 230.2-2012, and the performance of the diamond indenter shall be checked on the calibrated hardness tester. A set of cemented carbide standard test blocks is composed of five test blocks. At least five indentations shall be made on each cemented carbide standard hardness block, and the average hardness of each standard block and its difference from the calibration hardness shall be calculated. Calculate the arithmetic mean and range of the five differences. If the average value does not exceed ± 0.3hra of the calibration value and the range of range does not exceed 0.6 HRA, the indenter can be used. Cemented carbide standard hardness blocks shall have all or any of the following hardness values: 85.5, 88.5, 91.0, 92.0 and 93.0hra.

3. test steps

Select the cemented carbide standard hardness block closest to the hardness value (estimated) of the sample, and measure the hardness of three HRAS on the standard block. The difference between the average value of these three readings and the hardness value calibrated by the standard block shall be within ± 0.5hra.

If the difference is greater than ± 0.5hra, check the hardness tester and diamond indenter, and eliminate the cause of the error.

If the difference is within ± 0.5hr a, add or subtract the difference from the average hardness of the sample.

Vickers hardness test method

Fracture toughness (KIC) is considered as an inherent characteristic of a material, which refers to the fracture resistance of the material. The conventional standardized test method of KIC includes generating a small crack in the test sample and then applying a controllable load to expand the crack. Compared with the conventional method, the indentation fracture method is easier to test and has lower sample loss, which makes it a common choice to evaluate the fracture toughness of brittle materials.

When determining the fracture toughness of brittle materials, it’s critical to select the correct equations according to the crack morphology and material characteristics to calculate the fracture toughness. Indentation fracture toughness test is to estimate the KIC of materials by using the cracks generated by Vickers hardness indentation. These cracks were formed by applying a high load to a small piece of test material using a Vickers hardness indenter.

As shown in the figure below, there is a crack extending from each sharp corner in the ideal crack profile:

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 6

An example of a poor crack profile is as follows. If there are too many cracks or the crack length is uneven, the hardness method cannot be used to estimate KIC:

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 7

There are usually two kinds of cracks around the indentation, which are palmqvist cracks and median cracks. This paper briefly introduces the calculation method of cracks in cemented carbide. HV30 is usually selected as the scale.

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 8
How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 9
How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 10
How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 11

Of course, the simplest way is to select the measurement software, and then directly take the measured data for statistical calculation:

How to do Metallographic Preparation and hardness test of cemented carbide in meetyou CARBIDE 12

Bir cevap yaz?n

E-posta hesab?n?z yay?mlanmayacak. Gerekli alanlar * ile i?aretlenmi?lerdir

国产欧美成人精品第一区-日本黄色精品一区二区| 精品少妇一区二区18-一区二区三区日韩在线播放| 看肥婆女人黄色儿逼视频-秋霞电影一区二区三区四区| 久久精品人妻一区二区三区极品-久久99热这里只有精品免费| 日韩中文字幕v亚洲中文字幕-日韩亚洲av免费在线观看| 亚洲国产精品一区二区av-日本一级黄色一区二区| 亚洲另类自拍唯美另类-99国产精品兔免久久| 国产欧美一区二区三区嗯嗯-欧美一区二区日本国产激情| 精彩亚洲一区二区三区-中文字幕中文字幕在线色站| 亚洲欧洲成视频免费观看-国产福利一区二区在线观看| sobo欧美在线视频-免费av网址一区二区| 中文字幕日本在线资源-国产+成+人+亚洲欧洲自线| 看肥婆女人黄色儿逼视频-秋霞电影一区二区三区四区| 中文字幕日韩不卡久久-五月天中文字幕啊av| 青青草原免费国产在线视频-精品人妻乱码一区二区三区四区| 免费看黄色污污的网站-欧美一区二区三区爽爽| 亚洲愉拍自拍欧美精品app-亚洲一区不卡在线视频| 两性污污视频网站在线观看-亚洲欧美日韩激情一区| 91亚洲美女视频在线-熟妇人妻精品一区二区三区蜜臀| 午夜福利院免费在线观看-久久精品日产第一区二区三区画质| 亚洲黄片三级三级三级-国产成人一区二区在线视频| 久久久噜噜噜久久狠狠50岁-精品一区二区三区av| 一区二区三区日本韩国欧美-日本1区2区3区4区在线观看| 久久久国产精品电影片-精品孕妇人妻一区二区三区| hd在线观看一区二区-免费一区二区三区毛片在线| 国产日韩电影一区二区三区-美女露双奶头无遮挡物| 中文字幕日韩精品不卡一区二区-成人av在线观看一区二区| 国产精品电影在线一区-亚洲国产大片一区二区官网| 日韩毛片在线免费人视频-超碰中文字幕av在线| 日韩精品亚洲不卡一区二区-成人网在线视频精品一区二区三区| 欧美精品国产系列一二三国产真人-在线观看国产午夜视频| 蜜臀一区二区三区精品在线-99久久久精品免费看国产| 91麻豆免费在线视频-欧美中文天堂在线观看| 十九禁止观看无码视频-亚洲国产激情福利专区| 欧美伦乱淫老妇女激情吧-亚洲女邻居精品二区久久| 久久99国产综合精品女人-日韩一区二区三区在线不卡| 四虎成人在线免费视频-亚洲熟女中文字幕天堂| 国产福利视频一区二区三区-日韩人妻中文视频精品| 日本亚洲精品中字幕日产2020-很黄很黄的裸交视频网站| 精品亚洲卡一卡2卡三卡乱码-一区三区二插女人高潮在线观看| 日韩综合精品一区二区-丝袜美腿熟女人妻经典三级|