欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

The so-called U-axis refers to the processing method that can only be completed by lathe in the past and can also be completed by machining center. While the spindle rotates, the tool can be numerically controlled along the radial direction. Therefore, the surface and spherical surface can be machined with good accuracy. Because the lathe processing can also be completed with the machining center, the machining process is also intensive.

These two videos show two major features of U-axis machining:

1. One knife can be used for multiple purposes;

2. Radial movement on the machining center, with turning function.

The U-axis cutter used for complex workpiece processing on the machining center is composed of:

What is the U-axis Machining Center? 2Fig. 1 Schematic diagram of U-axis tool transmission

What is the U-axis?

While the cutter rotates, the cutter head can move radially along the end face of the tool holder. This kind of axis that can reach the accuracy of 0.001mm and move along the radial direction under the control of NC is called U-axis.

What is the U-axis Machining Center? 3Figure 2

What kind of workpiece can the U-axis tool process?

Turning parts that can be processed by machining center (outer circle processing, inner hole processing, end face processing) and U-axis tools can be processed; It can also realize conical surface processing, radial processing, thread processing, groove processing and so on

What is the U-axis Machining Center? 4

Figure 3

What is the maximum diameter of the U-axis tool?

The maximum travel of U-axis tool is fixed, but the size range of Machinable workpiece can be expanded by changing the tool holder. The tool holder can be designed arbitrarily as required. For example, the bore diameter of the boring tool can be changed, and the installation position of the tool head can deviate from the center.What is the U-axis Machining Center? 5Figure 4 tool travel calculation

Can external surface turning be realized by U-axis tool?

The turning of the outer surface of the workpiece can be realized by adjusting the installation direction of the cutter head, that is, turning the cutter head back to the inner installation.

What is the U-axis Machining Center? 6Figure 5 external surface turning

Can U-axis tools be used for re cutting and boring?

Yes, as shown in the figure: (machine feed: TVU4 (BT40), material: fc25 (v = 80m / min), cutting depth: 6mm, feed: 0.2mm/rev, material: S45C (v = 120m / min), cutting depth: 4mm, feed: 0.1mm/rev)

What is the U-axis Machining Center? 7

Figure 6 cutting and boring

What precision can be achieved by machining U-axis tools?

By using a set of automatic measurement and compensation system, the tolerance requirements of machining can be ensured to achieve the positioning accuracy repetition of ± 3 μ m. Positioning accuracy ± 1.5 μ m

How much roundness can the U-axis cutter achieve?

The case shown in the above figure: the roundness of the straight cylinder is 2.3 μ m. Cone roundness 2.6 μ M (processing conditions: rotating speed 1000rpm, feed: 0.06mm/rev)What is the U-axis Machining Center? 8Figure 7 roundness machining

Up to now, we know that for complex workpieces, the traditional practice is to process each face, hole and column with a separate tool. The machining center with U-axis cutter can carry out all kinds of machining as long as the complex workpiece is fixed on the workpiece table, and the accuracy is also guaranteed. The specific performance is as follows:

1. The number of boring turning tools can be reduced. One U-axis tool is equivalent to several boring tools

Что такое обрабатывающий центр с осью U? 9

Что такое обрабатывающий центр с осью U? 10Figure 8

2. It is easy to adjust and is used for machining workpieces with complex shapes. For complex workpieces, the traditional method is to turn and add after counterweight. Now using the machining center with U-axis cutter, the workpieces can be fixed on the workbench for machining.

Что такое обрабатывающий центр с осью U? 11

What is the U-axis Machining Center? 12Figure 9

3. Unless the U-axis cutter is used, the machining center cannot process the inner cone. See the processing case below (material: S45C size: φ sixty × 30 processing conditions spindle speed: 2300rpm feed: 0.06mm/rev processing accuracy surface roughness: 4S)

Что такое обрабатывающий центр с осью U? 13

Figure 10 machining of inner conical surface

4. Unless the U-axis cutter is used, the machining center cannot process the spherical surface. As shown in the following figure (material: scm414 hardness: hrc58 ~ 62 processing conditions spindle speed: 600rpm feed: 0.05mm/rev feed) φ 0.1mm machining accuracy shape φ 200.0278 + 0.033 (surface roughness: 2.5s)Что такое обрабатывающий центр с осью U? 14Figure 11 spherical surface machining

5. Finally, the program of U-axis tool is also very simple. The format (radius instruction) is the same as that of lathe program. Using G01 and G02, the taper R can be processed freely.

Что такое обрабатывающий центр с осью U? 15

Figure 12 processing drawing

Что такое обрабатывающий центр с осью U? 16

Figure 13 preparation procedure

Добавить комментарий

Ваш адрес email не будет опубликован. Обязательные поля помечены *

使劲操我小穴视频| 国产伦精品一区二区三区福利| 国产试看精品无码中| 国产精品免费久久久久久| 久久久久国产AV成人片| 留学生美女被大黑屌猛戳| 日本中文字幕无人区一区二区| 在线观看日韩欧美| 激情五月六月婷婷俺来也| 潮中文字幕在线观看| 久久综合娱乐中文网| 在线观看国产黄色| 操大屌粉的小穴视频| av日韩在线观看一区二区三区| 操老骚逼三级黄视频| 大鸡巴插我在线观看| 91性潮久久久久久久久| 男女边吃奶边做边爱视频| 一区二区在线不卡| 日本乱人伦中文在线播放| 18岁美女破处在线观看| 精品国产99亚洲一区二区三区| 欧美亚洲另类天天综合网| 大鸡插骚货人人色| 骚穴手机在线视频| 找个日韩操逼的看看| 亚洲精品自拍偷拍| 国产大码丝袜老熟女av| 美女插逼插出淫水来| 又大黄又硬又爽免费视频| 人妻波多野结衣爽到喷水| 青青河边草直播免费观看| 日韩视频在线网页| 国产午夜爽爽爽男女免费动漫AV| 看人妻仑乱A级毛片| 久久久久人妻一区精品加勒比| 一个色综合色综合色综合| 日本av在线一区二区| 麻豆国产欧美一区二区三区r| 西瓜在线看免费观看视频| 翘臀小穴在线观看|