欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Classification by diameter

① The common diameters of metric (mm) knives are: 0.5, 1, 1.5, 2, 2.5, 3, 4, 5, 6, 8, 10, 12, 16, 20, 25, 28, 30, 32, 35, 40, 50, 63
② The common diameters of inch knives are: 1 / 8, 1 / 4, 1 / 2, 3 / 16, 5 / 16, 3 / 8, 5 / 8, 3 / 4, 1, 1.5 and 2

Classification by material

(1) High speed tool steel tool is the most common tool, cheap, easy to buy, but easy to wear, wear and tear. Some Jinwei high speed tool steel tools with 3Co, Mn and other alloys have good wear resistance and high precision, such as LBK, YG and other types of tools, but the price is relatively expensive.
(2) Alloy tool
It is made of common alloy materials, high temperature resistance, wear resistance, high spindle speed, high processing efficiency and processing quality. It can process high hard materials (such as welded mould), so it is expensive. It is generally used in high precision and high quality processing occasions
(3) Discarded blade
This kind of cutter is made of alloy, which can be replaced, has good wear resistance and moderate price, so it is widely used in steel processing
The shape of the blade is square, diamond and round. The two corners of square and rhombic cutter grains need to be replaced after wear, while the ring surface of round cutter grains can be used. Therefore, it has good durability. The commonly used models are 25r5, 30r5, 32r5, 35r6, 16r0.8, 20r0.6, 25r0.8, 6R1, 8r0.5 and 10r0.5、

Do you know these common senses about NC milling machine tools? 2

Classification by tool shape


Flat milling cutter
The surface milling cutter is generally divided into two parts

  1. Flat end milling cutter, rough milling, remove a large number of blanks, small area horizontal plane or contour finish milling;
  2. Ball end milling cutter, also called R cutter. Semi finish milling and finish milling of curved surface are carried out;
    Application: widely used in various curved surface, arc groove processing. High temperature resistance: the maximum temperature for maintaining cutting performance is 450-550 / 500-600 ℃.
  3. Flat end milling cutter with chamfer can be used for rough milling to remove a large number of blanks, and can also be used for fine milling of small chamfer on flat surface (relative to steep surface).
  4. Forming milling cutter, including chamfering cutter, T-shaped milling cutter or drum cutter, tooth cutter and inner r cutter.
  5. Chamfering cutter. The shape of chamfering cutter is the same as that of chamfering cutter, which is divided into milling round chamfering cutter and oblique chamfering cutter.
  6. T-shaped cutter can mill T-shaped groove;
  7. Gear cutter, milling out all kinds of gear, such as gear.
  8. Rough cutter, designed for aluminum copper alloy cutting, can be processed quickly
    There are two common materials for flat milling cutter: high speed steel and cemented carbide. Compared with the former, the latter has high hardness and strong cutting force, which can improve the speed and feed rate, improve productivity, make the tool unobvious, and process stainless steel / titanium alloy and other difficult to machine materials, but the cost is higher, and it is easy to break the tool when the cutting force changes rapidly.
    (1) T-shaped cutter: also known as T-shaped milling cutter, semicircle milling cutter and keyway milling cutter, it is used for processing row position groove
    (2) Boring cutter: it is divided into rough boring cutter and fine boring cutter. Firstly, the bottom hole is pre processed with milling cutter or drill bit, and about 0.5 to 2 mm is reserved. Then the boring cutter is used for rough lining and fine lining processing. In this way, the precision of the round hole processed is relatively high, and the surface finish is also relatively high.
    (3) Drill: used for round hole processing, the accuracy of the hole is not very good.
    (4) Tap: for internal thread processing, may be used by hand, can also be installed on CNC machine tools.
    (5) Reamer: a rotary cutter with one or more teeth for cutting off the thin layer of metal on the surface of a machined hole, and a rotary finishing cutter with straight or spiral edge for reaming or hole repairing.
    (6) Ball flying knife: mainly on the alloy arbor, it is equipped with alloy ball cutter head. It is often used in semi finish machining and finish machining of curved surface with many dimensions.
    (7) Center drill: used for positioning processing. For example, before drilling with drill bit, center drill is used for positioning.
    (8) Lettering cutter: specially used for small font processing or pattern processing.
    (9) Flat flying knife: the arbor is equipped with diamond shaped blades with small R radii at the opposite ends of the blades. It is often used for semi finishing and finishing curved surface (I have seen this kind of tool, but why is it called this name); extremely
    It can be used for roughening if the side of the product or die is high, there is not much roughing allowance, and the tool diameter can cover the roughing allowance, but if it is used for die processing, the layer spacing is generally less than 0.3mm.
    (10) Disk milling cutter: mainly used for rough machining of rough materials, large plane to material processing.
  9. Flat end milling cutter, rough milling, remove a large number of blanks, small area horizontal plane or contour finish milling;
  10. Ball end milling cutter, also called R cutter. Semi finish milling and finish milling of curved surface are carried out;
    Application: widely used in various curved surface, arc groove processing. High temperature resistance: the maximum temperature for maintaining cutting performance is 450-550 / 500-600 ℃.
  11. Flat end milling cutter with chamfer can be used for rough milling to remove a large number of blanks, and can also be used for fine milling of small chamfer on flat surface (relative to steep surface).
  12. Forming milling cutter, including chamfering cutter, T-shaped milling cutter or drum cutter, tooth cutter and inner r cutter.
  13. Chamfering cutter. The shape of chamfering cutter is the same as that of chamfering cutter, which is divided into milling round chamfering cutter and oblique chamfering cutter.
  14. T-shaped cutter can mill T-shaped groove;
  15. Gear cutter, milling out all kinds of gear, such as gear.
  16. Rough cutter, designed for aluminum copper alloy cutting, can be processed quickly
    There are two common materials for flat milling cutter: high speed steel and cemented carbide. Compared with the former, the latter has high hardness and strong cutting force, which can improve the speed and feed rate, improve productivity, make the tool unobvious, and process stainless steel / titanium alloy and other difficult to machine materials, but the cost is higher, and it is easy to break the tool when the cutting force changes rapidly.
    (1) T-shaped cutter: also known as T-shaped milling cutter, semicircle milling cutter and keyway milling cutter, it is used for processing row position groove
    (2) Boring cutter: it is divided into rough boring cutter and fine boring cutter. Firstly, the bottom hole is pre processed with milling cutter or drill bit, and about 0.5 to 2 mm is reserved. Then the boring cutter is used for rough lining and fine lining processing. In this way, the precision of the round hole processed is relatively high, and the surface finish is also relatively high.
    (3) Drill: used for round hole processing, the accuracy of the hole is not very good.
    (4) Tap: for internal thread processing, may be used by hand, can also be installed on CNC machine tools.
    (5) Reamer: a rotary cutter with one or more teeth for cutting off the thin layer of metal on the surface of a machined hole, and a rotary finishing cutter with straight or spiral edge for reaming or hole repairing.
    (6) Ball flying knife: mainly on the alloy arbor, it is equipped with alloy ball cutter head. It is often used in semi finish machining and finish machining of curved surface with many dimensions.
    (7) Center drill: used for positioning processing. For example, before drilling with drill bit, center drill is used for positioning.
    (8) Lettering cutter: specially used for small font processing or pattern processing.
    (9) Flat flying knife: the arbor is equipped with diamond shaped blades with small R radii at the opposite ends of the blades. It is often used for semi finishing and finishing curved surface (I have seen this kind of tool, but why is it called this name); extremely
    It can be used for roughening if the side of the product or die is high, there is not much roughing allowance, and the tool diameter can cover the roughing allowance, but if it is used for die processing, the layer spacing is generally less than 0.3mm.
    (10) Disk milling cutter: mainly used for rough machining of rough materials, large plane to material processing.
Do you know these common senses about NC milling machine tools? 3

Selection of cutting tools

  1. Select tool according to processing material
    ① Steel material
    Mild steel: such as 45 ° steel, 50 ° steel, imported trump steel, these materials are relatively easy to process, domestic high speed steel tool (such as ATA tool) can be processed, also can use imported YG, SKT, LBK tool processing
    Hard steel: such as P20, 738, etc. these steel materials are made of domestic high-speed steel (such as ATA); they are difficult to process, so they can be processed with imported YG, SKT, LBK tools, or alloy tools.
    Extra hard steel: such as S136, 718, oil steel, hardware alloy steel, etc. these materials are very hard, and can not be processed with domestic high-speed steel cutter (such as ATA cutter). At this time, alloy cutter can be used for processing.
    ② Copper and aluminum
    These materials are relatively soft, generally can be processed with a variety of tools, but to consider the toughness of soft materials, so the tool to benefit, spindle speed is fast.
    ③ Quenched and welded mould materials shall be processed with alloy cutting tools.
  2. Tool selection according to processing conditions
    (1) Tool selection according to workpiece size
    (2) The deeper the depth, the larger the tool diameter
    (3) Choose the cutter according to the processing steps: rough machining should use big cutter, and generally use round nose cutter to roughen, ball cutter is strictly prohibited to roughen, while finish machining surface should use ball cutter, and the effect of finish machining surface with flat milling cutter or round nose cutter is not ideal (for example, according to finish machining, the cutter diameter is required)
    Generally, the processing steps are as follows: using fire knife to roughen, small knife to roughen (clearing the residue left by fire knife), fire knife, light knife, small knife and light knife. Don’t add a whole workpiece with a knife to save trouble. The correct way of thinking is to use big knife to roughen the whole workpiece, and use small knife to process the remnant angle left by big knife. In order to avoid the empty knife and improve the processing efficiency, it is suggested to use regional processing to limit the cutting range
    (4) Choose the cutter according to the processing efficiency: it is more efficient to use the flat milling cutter or round nose cutter to process the plane, while it is more efficient to use the slope cutter to process the smooth slope surface.
    According to the size of the tool diameter, the most suitable tool length is selected.
    Diameter 12 mm not exceeding 46 mm
    Diameter 10 mm not exceeding 40 mm
    Diameter 8 mm not exceeding 35 mm
    Diameter 6 mm not exceeding 30 mm
    Diameter 5 mm not exceeding 26 mm
    Diameter 4 mm not exceeding 22 mm
    Diameter 3 mm not exceeding 18 mm
    Diameter 2 mm not exceeding 8 mm
    Diameter 4 mm not exceeding 4 mm

人妻日韩精品中文字幕图片-麻豆极度性感诱人在线露脸| 俄罗斯胖老太太黄色特级片-国产精品黑丝美腿美臀| 国产剧情av中文字幕-五月婷婷在线手机视频| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 亚洲区欧美区在线视频-亚洲碰碰人人AV熟女天堂| 交换朋友的妻子中文字幕-日本美女8x8x8x8| 一区二区三区女同性恋-熟妇高潮一区二区高清网络视频| 熟女熟妇伦51788-国产av在线播放一区二区三区| 国产精品一区二区欧美视频-国产一区二区三区天码| 国产剧情av中文字幕-五月婷婷在线手机视频| 91麻豆免费在线视频-欧美中文天堂在线观看| 在线国产自偷自拍视频-蜜桃a∨噜噜一区二区三区| 成人av一区二区蜜桃-亚洲色图激情人妻欧美| 亚洲产国偷v产偷v自拍性色av-亚洲欧美日韩国产三区| 亚洲国产欧美日韩不卡-熟妇激情一区二区三区| 国产福利视频一区二区三区-日韩人妻中文视频精品| 亚洲最新国产无人区123-黄片一区二区在线观看| 中文字幕日韩精品不卡一区二区-成人av在线观看一区二区| 欧美精品国产白浆久久正在-国产精彩视频一区二区三区| 99精品只有久久精品免费-蜜臀一区二区三区精品久久久| 国内精产熟女自线一二三区-六月丁香婷婷在线观看| 欧美精品啪啪人妻一区二区-嫩草人妻舔舔羞羞一区二区三区| 99久久精品一区二区成人-麻豆国产av玩弄放荡人妇系列| 国模自慰一区二区三区-日韩一级黄色片天天看| mm在线精品视频在线观看-欧美国产日韩在线一区二区三区| 中文字幕偷拍亚洲九色-亚洲视频不卡一区二区天堂| 久久网站中文字幕精品-三级精品久久中文字幕| 亚洲一区二区免费av-中文字幕人妻久久久一区二区三区| 小12萝自慰喷水亚洲网站-chinese偷拍一区二区三区| 一区二区国产高清在线-日本高清无卡一区二区三区| 国产一区二区三区四区五区麻豆-欧美一级在线视频播放| 国产成人精品免费视频大全办公室-亚洲欧美日本综合在线| 亚洲福利视频免费观看-中文字幕日本不卡一区二区| 久久蜜桃精品一区二区-麻豆视频啊啊啊好舒服| 99精品只有久久精品免费-蜜臀一区二区三区精品久久久| 久久人妻一区二区三区欧美-国内不卡的一区二区三区| 亚洲av乱码一区二区-九九免费在线观看视频| 人妻丝袜中文字幕在线视频-亚洲成av人片一区二区三区| 在线视频成人一区二区-亚洲另类中文字幕在线| 亚洲永久免费在线观看-亚洲欧美导航一区二区导航| 国产一级片久久免费看同-麻豆精品尤物一区二区青青|