欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

  1. What is heat treatment and heat treatment oil?

A: the heat treatment of steel is to heat the steel to a certain temperature, keep it for a period of time, and cool it under the selected process conditions, so as to change the metallographic structure of the steel, so as to obtain the required process properties and mechanical properties.

The medium used to cool steel in heat treatment process is called heat treatment oil.

What is Heat Treatment Oil? 2
  1. What is the cooling principle of quenching oil?  

A: the cooling process of steel in quenching oil transfers heat in three different ways. The first stage is the steam film stage, with low cooling speed; the second stage is the boiling stage, with the fastest cooling speed; the third stage is the convective heat transfer stage, with slow cooling speed.  

  1. How to determine the characteristic temperature and time of quenching oil?

A: the characteristic temperature of quenching oil refers to the temperature at which the steam film breaks, that is, the boiling stage begins, and the corresponding time is the characteristic time. Characteristic temperature and characteristic time are important indexes to evaluate the quality and performance of quenching oil.

  1. What is the meaning of the cooling time of quenching oil from 800 ℃ to 400 ℃?

A: the cooling time of quenching oil from 800 ℃ to 400 ℃ directly reflects the cooling ability of quenching oil in austenite unstable zone. The characteristic temperature of quenching oil is high, and the cooling time from 800 ℃ to 400 ℃ is short, which can avoid the transformation of parts to pearlite structure, so as to obtain the required martensite structure and lower bainite structure. Make the parts have high hardness, high fatigue strength and high wear resistance.

  1. What are the characteristics of heat treatment oil?

A: as the heat treatment oil works under high temperature for a long time, it should have the following main properties: good cooling property, high flash point and ignition point, good thermal oxidation stability, as low as possible viscosity and moisture content, and certain brightness.

  1. What is the specification of heat treatment oil in China? How is it classified?

A: the specification of heat treatment oil in China is sh0546-92. Quenching oil is divided into three categories: cold bath quenching, hot bath quenching and tempering oil. The service temperature of cold bath quenching oil is 20-80 ℃, and the maximum temperature is not more than 100 ℃, such as ordinary quenching oil, rapid quenching oil, bright quenching oil and vacuum quenching oil; the service temperature of hot bath quenching oil is 120-200 ℃, such as isothermal grading quenching oil, which is divided into No. 1 and No. 2; tempering oil is also divided into No. 1 (used for 100-180 ℃) and No. 2 (used for 180-270 ℃).

  1. What is quenching oil and tempering oil?

A: the cooling medium used in the quenching process is called quenching oil, which is the main representative of the heat treatment process, and the heat treatment oil used in the tempering process is called tempering oil.

What is Heat Treatment Oil? 3
  1. What is bright quenching oil?

A: the metal parts heated to a certain temperature can still keep bright surface after cooling by quenching oil, which is called bright quenching oil. Usually bright quenching oil is added with bright additive and quenched in protective atmosphere.

  1. What is rapid quenching oil?

A: rapid quenching oil refers to the quenching oil with relatively fast cooling speed. The characteristic temperature of quenching oil is 580-640 ℃, and the characteristic time is less than 4 seconds. The cooling time from 800 ℃ to 400 ℃ is 4-5 seconds, which is collectively referred to as rapid quenching oil. Rapid quenching oil is suitable for quenching and tempering, carburizing and other parts requiring high cooling rate, large forging parts, large gear and quenching press in salt bath furnace, box furnace, Chinese furnace and continuous quenching furnace.

  1. What is vacuum quenching oil?

A: the quenching oil used as cooling medium in vacuum quenching process is called vacuum quenching oil. The vacuum quenching oil must have low saturated vapor pressure, small evaporation loss, good thermal stability and cooling capacity. It is suitable for vacuum quenching of bearing steel, die steel, large and medium aviation structural steel, etc.

  1. What is austempering oil? How many?

A: isothermal quenching is to first heat the quenching medium to the required isothermal temperature, and then put the heated parts in the quenching medium, so that the transformation of lower bainite structure is completed in the isothermal process. The cooling medium used in this process is called isothermal quenching oil; graded quenching is to put the heated workpiece in the medium slightly higher than the martensite transformation temperature for cooling, and wait for the inside and outside of the workpiece After the temperature is the same, and before the austenite begins to decompose, it is quickly transferred to the oil and cooled to room temperature, so that austenite transforms into martensite. The cooling medium used in this process is called step quenching oil. Austempering is applicable to the quenching of bearing steel, carburized steel bearing inner and outer rings, automobile gears, precision parts, half shafts and other workpieces and easily deformed parts. There are two kinds of Austempering oil No.1 and No.2, of which the service temperature of No.1 austempering oil is about 120 ℃ and that of No.2 austempering oil is about 160 ℃.

What is Heat Treatment Oil? 4
  1. What are the functions and characteristics of tempering oil?

A: tempering is a process that must be carried out after steel quenching. Its purpose and function is to reduce and eliminate the internal stress caused by steel quenching and reduce brittleness. Tempering oil has good thermal oxidation stability, high flash point and good heat transfer performance. It can be divided into No. 1 and No. 2 grades. The service temperature of No. 1 is about 150 ℃ and that of No. 2 is about 200 ℃.

  1. What is multistage (general) quenching oil? What are the characteristics?

Answer: multistage (general) quenching oil refers to the cooling medium used in the universal (multi-purpose) quenching furnace, which can be used to quench a variety of steels, that is, it is suitable for materials with poor hardenability, as well as for materials with good hardenability and easy deformation. The multistage (general) quenching oil has fast cooling speed at low temperature (40-80 ℃), which is equivalent to fast quenching oil. It has good thermal oxidation stability and certain cooling capacity at high temperature (120-200 ℃), and has the characteristics of small deformation after quenching.

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

色噜噜噜噜一区二区三区| 鸡巴插进缝里 日本| 国产熟女露脸普通话对白| 国产精品无码毛片久久久| 精品无码一区二区三区无码| 亚洲中文字幕在线无码一区二区| 加勒比在线不卡一区二区观看| 韩国无玛黄片毛片| 日本一区二区高清免费不卡| 熟女菊蕾老妇俱乐部视频| 男人的下面进女人的下面在线观看| 美性中文网中文字幕91| 亚洲AV天堂一区二区香蕉| 99久久精品国产一区二区成人了| 九九热在线精品免费看| 内射后入在线观看一区| 最新日本一区二区三区免费看| 亚洲欧美一区二区爽爽爽| 97青青草免费在线观看| 人妻人久久精品中文字幕| 尤物AV无码国产在线看| 大屁股真人日逼视频| 日韩精品一区二区天堂| 综合欧美日韩一区二区三区| 操小骚逼高潮视频| 黑人与日本人妻中文字幕| 欧美巨屌虐无毛骚逼| 欧美 亚洲 日本 国产| 国产精品无码av在线一区| 亚洲男人的天堂2021| 男生插女生下面流出白色精液视频| 国产精品一区二区日本欧美| 国产精品视频一区二区三区八戒| 国产日女人视频在线观看| 啊服慢一点插入逼逼| 精品久久久久五月婷五月| 国产精品一区二区三区涩涩av| 大阴茎交于大阴户黄片视频| 国产欧美日本韩国一区二区| 三上悠亚精品一区二区久久| 97人妻精品一区二区三区视频|