欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

What Else can Knurling Cutters Cope with Besides Knurling 2

Custom knurling knife is a fast processing method for special knurling.In the knurling processing, general will encounter such as straight grain knurling and anilox roll processing situation, again a little bit complicated, may be to processing end face of the knurling, but if the knurling requirements of the products is V, this special grain processing knurled will have great difficulty, large amount of products, custom knurled wheel and cutting tool can be processed smoothly.

Mesh knurled end face rolling

 V-shaped rolling flower

V-shaped rolling pattern road is also known as herringbone rolling flower, which belongs to a non-standard rolling pattern road. There is no such roller on the market for now. This V-shaped pattern is very special and can be processed only after special processing. V-shaped knurled is often used in knurled nuts, knurled screws and other products.

What Else can Knurling Cutters Cope with Besides Knurling 3

V-shaped knurling pattern

Generally, the conventional processing method is to carve the grain directly through programming, but this method is difficult to program first, followed by relatively low production efficiency and high cost. There are two processes, one is left twill, and the other is right twill. This processing method is easy to lead to asymmetric knurling grain.

What Else can Knurling Cutters Cope with Besides Knurling 4

V-shaped knurled wheel

If the number of processed products is large, it is recommended to use customized knurling wheel and cutter. This kind of V-shaped knurling cutter can be used to press out V-shaped knurling at one time

What Else can Knurling Cutters Cope with Besides Knurling 5

Lathe embossing cutter

Straight line embossing

For:

1. Cold working deformable materials

2. Suitable for processing all patterns, including mark knurling

3. Suitable for end face knurling and inner hole knurling

matters needing attention:

1. Knurling of thin wall workpiece

2. Processing stainless steel, the effect is general

Advantages of embossing:

1. The tool can start machining at any position of the workpiece

2. It can be knurled to the root of the workpiece, and can be processed by cutting

3. After knurling, the diameter of the workpiece will increase and the surface of the workpiece will be compressed

4. Compared with the cutting process, the radial pressure of rolling process is large, and improper operation is easy to damage the machine tool

What Else can Knurling Cutters Cope with Besides Knurling 6

straight line Cutting

For:

1. Suitable for machining all materials

2. Suitable for knurling of thin wall workpiece

3. The quality of the pattern is excellent, and the surface of the pattern is smooth and uniform

4. High precision of knurling pattern

matters needing attention:

1. The processing range is limited, so it can’t be processed in full size

2. It can only process straight and convex net pattern

3. The cutter can only move axially on the cylindrical workpiece

4. The tool can only be machined from the starting end of the workpiece. When machining from the middle of the workpiece, it must be grooved first

5. The cutting tool needs to be set and adjusted accurately, otherwise the perfect effect can not be achieved

Cutting advantages:

1. The diameter of the workpiece has no obvious change after machining

2. Minimum surface compression

3. The quality of the processed flower shape is excellent, and the surface of the flower shape is smooth and uniform

4. Compared with extrusion knurling, the radial pressure is smaller

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

免费观看的黄视频一级国产| 欧美一区二区三区四区五区精品| 把韩国美女操出水| 精品久久久久亚洲中文字幕| 国产A级黄片下载| 大鸡巴射在穴穴里的视频| 一区二区三区av精品| 日韩欧美一区二区三区在线视频| 国产精品熟女视频播放| 久久亚洲精品中文字幕一| 影音先锋亚洲中文综合网| 99爱这里只有精品| 精品一区二区视频在线观看| 亚洲国产成人久久成人52| 婷婷激情五月天四房| 日日狠狠久久888av| 日韩美女一区二区三区香蕉视频| 国产精品久久大屁股白浆| 欧美区 日韩区 亚洲区| 日本免费一区二区在线| 欧美亚洲干妞内射| 精品人妻少妇一区二区三区不卡| 春宵福利导航91| 欧美 日韩 亚洲 熟女| 无码成人一区二区| 精品免费久久久久久久久| 日本高清不卡一区二区三区| 精品久久久久亚洲中文字幕| 国产试看精品无码中| 国产欧美亚洲一区二区三| 8050午夜三级的全黄| 国产区高清在线一区二区三区| 大鸡巴抽插小骚逼视频免费| 骚女性爱视频在线看| 中文字幕国产精品一区二区三区| 玖玖资源站无码专区| 美女骚逼黄色18禁| 视频一区二区三区日韩视频| 插逼爽歪歪视频免费| 日韩精品诱惑一区?区三区| 午夜精品福利一区二区三区蜜桃p|