欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

The end mill cutter, which is the most commonly used milling cutter on CNC machine tools, has cutting edges on both the cylindrical surface and the end face. It can perform simultaneous or separate cutting operations. It is mainly used for flat milling, groove milling, step surface milling, and contour milling.

Flute number

The number of cutting edges on an end mill cutter mainly includes 2-flute, 3-flute, 4-flute, 6-flute, and other types. The number of flutes is related to the size of the chip pocket area for collecting the chips. The chip pocket is a groove for temporarily storing the chips. If we consider the rotating cylindrical profile of the end mill cutter as 100%, the chip pocket areas for various numbers of flutes are shown in the diagram below.

m?yn końcowy

Proportion of the cross-sectional area of the chip holding tank

As the number of flutes increases, the chip pocket area gradually decreases while the cutting edge area increases, leading to improved rigidity. The characteristics and applications of an milling cutter depend on the number of flutes. (Refer to the table below)

What are the 7 Important Parameters of an End Mill Cutter? 2

Characteristics and applications of end mills with various blade numbers

D?ugo?? kraw?dzi tn?cej

When installing an mill cutter on a tool holder for machining, deflection as shown in the diagram can occur due to cutting resistance. The deflection is directly proportional to the cutting resistance and, more specifically, proportional to the cube of the length (overhang) from the end mill cutter to the tool holder.

What are the 7 Important Parameters of an End Mill Cutter? 3

Deflection of end milling cutter

To improve the perpendicularity of the machined surface, which refers to the surface deformation of the machined surface, it is necessary to reduce deflection. This can be achieved by minimizing the overhang of the mill cutter, which means using an end mill cutter that is slightly longer than the length of the machining portion.

Therefore, the cutting edge length of a mill cutter is generally categorized as follows:

a.Extra-short

b. Short

c. Medium

d. Medium-long

e. Long

f. Extra-long

 

helix angle

The spiral direction of an end mill cutter is generally right-hand spiral. When using it, the rotation is in a clockwise direction when viewed from the installation side (the side of the tool holder) – this is referred to as right-hand rotation. Cutting tools that rotate in a right-hand direction are called right-hand tools, while those that rotate counterclockwise (left-hand rotation) are called left-hand tools. The mill cutters discussed in this chapter are right-hand tools with a right-hand spiral.

What are the 7 Important Parameters of an End Mill Cutter? 4

 

Left Blade Left Spiral Left 30 ° and Right Blade Right Spiral Left 30 °

The helix angle of a mill cutter is generally 30°. A smaller helix angle results in poorer cutting sharpness, while a larger helix angle provides better cutting sharpness. However, increasing the helix angle can also increase the axial force in the direction of tool retreat, which may lead to tool dislocation. The characteristics and applications of end mill cutters with different helix angles are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 5

Table of Characteristics and Applications of End Mills with Different Helical Angles

Peripheral blade

The shapes, types, and characteristics of peripheral edge end mill cutters are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 6

The shape of the outer edge

What are the 7 Important Parameters of an End Mill Cutter? 7

Right angle and spiral flute

końcowa kraw?d? tn?ca

The shapes, types, and characteristics of the bottom edge of a mill cutter are shown in the table below. The center cutting edges include shapes with long and short cutting edges (shown as A and C in the table) as well as twisted core shapes (shown as B in the table). They can all be used for axial feed cutting.

What are the 7 Important Parameters of an End Mill Cutter? 8

The purpose of each shape of end milling cutter

Hilt? of end mill

The shapes, types, and characteristics of the shank of an end mill cutter are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 9

Tool handle shape

The shapes, types, and characteristics of the neck of an end mill cutter are shown in the table below:

Jakie s? 7 wa?nych parametrów frezu palcowego? 10

The shape of the handle and neck of the knife

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

操批在线观看视频| 鸡巴插骚逼视频欧美风格| 老湿机69福免费破解版| 91精品国产剧情欧美一区二区| 亚洲v国产v天堂a无码| 性一交一乱一乱一区二区| 俩男人插下面的视频| 性色av少妇一区二区三区多人| 天天爽夜夜爽夜夜爽一区| 日本免费暖暖在线小视频| 日本不卡免费一区二区视频| 97人人澡人人爽人人揉| 国产三级精品久久久久| 日韩av午夜福利在线观看| 高清国产一区二区| 亚洲午夜国产片在线观看| 日韩欧美综合一二三区| 日韩无码av三级片| 精品区在线导航视频观看| 美女荒郊野外找男人靠逼| 欧美日韩国产这里只有精品| 非洲大鸡巴操逼黄色录像| 国产精品三级一区二区| 黄色日女人逼视频| 亚洲欧美一区二区爽爽爽| 久久99热人妻偷产精品| 西西大尺度无码免费视频| 野外日逼视频免费看| 日韩美女黄大片在线观看| 在线免费看污视频| 亚洲av一区二区在线看| 亚洲欧美日韩清纯唯美第一区| 日韩无码av三级片| 国产无码久久久久久| 久久久一区二区三区日本| 一区二区在线不卡| 精品国产自在现线看| 日本欧美一区二区三区| 国产精品操大屁股老淑女| 又爽又粗又大又长的爆草| 看人妻仑乱A级毛片|