欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

As more and more metal parts manufacturers understand the advantages of powder metallurgy, they begin to look for new and improved methods to use this process. At the same time, they are familiar with and familiar with the current forging process.

But what if you can combine these two technologies to produce forged metal parts with better performance than traditional powder metal (PM)? This is actually possible. In fact, it has a name: powder metal forging.

Let’s understand the use of powder metallurgy forging and traditional powder metallurgy and traditional forging. As a reward, we will show a new alternative that is even more efficient than PM forging…

What Is Powder Metal Forging?

Powder metal forging is the combination of powder metallurgy and forging. Also known as powder forging, this metal forging uses powder materials because they have advantages in the following aspects:

1 forming capacity

2 reduce the number of process steps to produce final components with some potential unique advantages, such as fracture and cracking of connecting rod end cap

3 minimum waste

The rest is forged to produce high-strength parts that will be more durable than traditional powder metal components.

The process of forging powder metal begins when the raw powder is compacted and then sintered. After sintering, but when the part is still at high temperature (above 1800 ° f), the manipulator immediately grabs the part and transfers it to the forging die.

If real estate is related to “l(fā)ocation”, then the powder metal forging process is related to “density”. The purpose is to make PM parts as close to full density as possible. This will provide you with higher performance and higher mechanical properties. If operated properly, the porosity of parts can be eliminated by more than 99%.

Czy mo?liwe jest wytwarzanie cz??ci metalowych przez kucie metalurgiczne? 2

Traditional powder metal forged parts VS sintering parts

Determining whether to use powder forging requires understanding which metals can be forged and which quality is most important for the project. Powder metallurgy can even produce complex parts at a higher productivity than forging.

Powder metal materials can be subject to conventional sintering treatment to improve tensile strength and bending fatigue strength. Due to the inherent net forming ability of powder metallurgy, forming is easier than stamping and processing.

Nevertheless, when strength is absolutely necessary and PM is not enough, metal forging process may be a better choice. Through powder forging, the shape complexity is good, but powder metallurgy is still much better.

However, there are still many examples of powder metallurgy forging and impressive results have been achieved. Take the connecting rod as an example. It has a unique shape. The pin end enters the interior of the piston, and the crank end is a large hole at the bottom, which is molded on the high shaft. With powder metallurgy forging, you can actually make these holes during the forging operation, thus reducing material waste and not requiring too much “flash” to fill the blockage or precision forging indentation.

You can use the traditional forging method to forge 1.2 pounds of raw materials, but with the powder metallurgy forging method, there may be only 1.02 pounds of low-cost iron copper carbon powder. This means reducing secondary processing – giving you a lead in the game.

Czy mo?liwe jest wytwarzanie cz??ci metalowych przez kucie metalurgiczne? 3

It’s even better: ultra high temperature as an alternative to powder forging

Combining powder metallurgy with forging sounds like a win-win, right? This is absolutely true.. If your budget is not a problem.

In order to manufacture forged metal products, manufacturers need to:

1A compactor

2A specially designed sintering furnace

3A forging press

4 other equipment

Making all these machines work is very expensive, and the cost will fall directly on your lap.

Traditional powder metallurgy may not provide the level of performance you want, but traditional forging may be very expensive. So what can we do for people in between and on the edge?

Ultra high temperature sintering can improve the strength and other properties of powder metal parts, making you close to the position of powder metallurgy forging. We define ultra-high temperature sintering as heating iron powder at a temperature close to 2500 ° F.

This is a compromise that may actually give you more than the sum of the parts. Traditional powder metallurgy can provide 50-70% performance of powder metallurgy forging. Ultra high temperature sintering can provide 80-90% of powder metallurgy forging.

By using ultra-high temperature sintering, you can retain the more inherent dimensional accuracy provided by metal powder, but you can also provide mechanical properties close to the forging capacity of powder metallurgy.

One always popular side effect is that using a strict PM process may make material use more efficient. When forging connecting rods, the manufacturer must remove the resulting “flash”. Ultra high temperature sintering can produce a connecting rod to make your strength requirements without manual finishing, which will make it ready for field action.

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

日韩高清精品一区有码在线| 国产裸模大尺度私拍视频| 欧美日韩精品视频在线第一区| 日本入室强伦姧人妻中文| 国产美女色诱视频又又酱| 老司机免费福利午夜入口| 国产裸体视频BBBBB| 97性无码区免费| 无码成人一区二区| 日本人妻与家公的伦理片| 91kaobi视频在线| 另类亚洲欧美专区第一页| 精品无码一区二区三区无码| 奇米一区二区三区视频在线观看| 亚洲一区二区女同性恋免费看| 麻豆91精品96久久久| 日韩 中文字幕在线最新| 亚洲精品成a人在线观看| av日韩在线观看一区二区三区| 欧美日韩一级视频| 欧美日韩一区精品一区精品| 男生用鸡巴操女生的视频| 欧美黑屌操B内射冒白浆| 操女人逼逼骚逼逼| 欧美日本欧美日本区一区二| 天天摸天天添人人澡| 操美女干逼调教捆绑视频| 操逼啊 啊 啊黄色视频| 日韩人妻精品一区二区三区99| 国产精品视频一区二区三区分享| 欧美日韩欧美国产中文字幕| 久久精品人人爽人人爽快| 国产尤物蜜臀AV| 九九视频精品只有这里有| 成人黄色网破处在线播放| 黄色视频网在线观看| 白虎美女被大基吧操| 插我舔内射18免费视频| 无码爆一二三区免费视频| 黄色av手机在线观看| 黑人大吊又操又添|