欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Cemented carbide

The base of the cemented carbide consists of two parts: one part is the hardened phase; the other part is the bonded metal.
The hardened phase is a transition metal carbide in the periodic table, such as tungsten carbide, titanium carbide, and tantalum carbide. Their hardness is high, the melting point is above 2000 °C, and some even exceed 4000 °C. In addition, nitrides, borides, and silicides of transition metals have similar properties and can also act as hardened phases in cemented carbides. The presence of the hardened phase determines the alloy’s extremely high hardness and wear resistance. The binder metal is generally an iron group metal, and cobalt and nickel are commonly used.
When manufacturing cemented carbide, the raw material powder used has a particle size of between 1 and 2 microns and is highly pure. The raw materials are compounded according to the specified composition ratio, added with alcohol or other medium, wet-grinded in a wet ball mill, so that they are thoroughly mixed and pulverized, dried, sieved, and then added with a molding agent such as wax or glue, and then dried and passed. Sieve the mixture. Then, when the mixture is granulated, pressed, and heated to a temperature close to the melting point of the binder metal (1300 to 1500 ° C), the hardened phase forms a eutectic alloy with the binder metal. After cooling, the hardened phases are distributed in a grid of bonded metals that are closely linked to each other to form a solid whole. The hardness of the cemented carbide depends on the content of the hardened phase and the grain size, that is, the higher the content of the hardened phase and the finer the grain, the greater the hardness. The toughness of cemented carbide is determined by the bond metal. The higher the bond metal content, the greater the flexural strength.
In 1923, Schreiter of Germany added 10% to 20% of cobalt as a binder to tungsten carbide powder, inventing a new alloy of tungsten carbide and cobalt, which is second only to diamond in hardness. The first type of cemented carbide. When a tool made of this alloy cuts steel, the blade wears quickly and even the edge of the blade breaks. In 1929, Schwarzkov in the United States added a certain amount of complex carbides of tungsten carbide and titanium carbide to the original composition, which improved the performance of the tool cutting steel. This is another achievement in the history of cemented carbide development.
Cemented carbide has a series of excellent properties such as high hardness, wear resistance, strength and toughness, heat resistance and corrosion resistance, especially its high hardness and wear resistance, which remains basically unchanged even at a temperature of 500 ° C. It still has a high hardness at 1000 °C. Carbide is widely used as a tool material, such as turning tools, milling cutters, planers, drills, boring tools, etc., for cutting cast iron, non-ferrous metals, plastics, chemical fiber, graphite, glass, stone and ordinary steel, can also be used for cutting Hard-to-machine materials such as heat-resistant steel, stainless steel, high manganese steel, and tool steel. The cutting speed of new cemented carbide tools is now several hundred times that of carbon steel.
Cemented carbide can also be used to make rock drilling tools, mining tools, drilling tools, measuring gages, wear parts, metal grinding tools, cylinder liners, precision bearings, nozzles, etc. Coated cemented carbide has also been available for nearly two decades. In 1969, Sweden successfully developed a titanium carbide layering tool. The base of the tool is tungsten-titanium cobalt hard alloy or tungsten-cobalt hard alloy. The thickness of the surface titanium carbide coating is only a few micrometers, but compared with the same grade alloy tool. The service life is extended by 3 times and the cutting speed is increased by 25% to 50%. The fourth generation of coating tools appeared in the 1970s for cutting difficult materials.

Superalloy

Superalloys usually work at temperatures above 700 ° C (or even 1000 ° C) and must have special properties such as oxidation resistance and high temperature strength.
Oxidation and corrosion are the weak points of metals. Under high temperature conditions, the oxidative corrosion reaction of metals will be greatly accelerated. As a result, the surface of the metal will be rough, affecting its accuracy and strength, and even the parts will be scrapped. If it works under the high temperature conditions of corrosive medium (such as phosphorus, sulfur and vanadium in the gas after high temperature and high pressure gasoline combustion), the corrosion effect is stronger, so the high temperature alloy must have high resistance to oxidation and corrosion.
Superalloys operating at very high temperatures must have sufficient creep resistance (ie, slow and continuous deformation of solid materials under certain stress) to ensure that they are subjected to certain temperatures and stresses. Working long hours, the total deformation is still within a certain tolerance.

A minute to learn the difference between cemented carbide and superalloy 1

Superalloys work under high temperature conditions or under alternating temperature conditions, are more prone to fatigue failure than normal temperature, or cause considerable thermal stress due to repeated rapid cold and heat changes during work. Superalloys must have good resistance to fatigue (ie, sudden breakage of materials or parts under long-term varying loads).
In order to meet the needs of the latest high-tech, high-temperature alloys based on refractory metals (W melting point 3400 ° C, Re3160 ° C, Ta 2996 ° C, Mo 2615 ° C, Nb 2415 ° C) can work in high humidity environment above 1500 ° C, suitable for manufacturing Spacecraft components working in high temperature, high stress environments. Among the refractory metals, the alloys of Ta and Nb have the characteristics of high temperature resistance and corrosion resistance, and high strength and hardness. Some bismuth based alloys can operate in the range of 1300 to 1600 ° C, which is 300 to 500 ° C higher than nickel based alloys. A bismuth-based alloy developed in China, containing W8% and Hf2%, still has high strength, good machinability and weldability at an ultra-high temperature of 2000 ° C, and is a more ideal superalloy. Cermets are sometimes also included in superalloys.

Dodaj komentarz

Twój adres email nie zostanie opublikowany. Pola, których wype?nienie jest wymagane, s? oznaczone symbolem *

黑人大鸡巴日小逼| 国产成人亚洲欧美久久| 色狠狠久久av北条麻妃| 久久国产精品二卡| 神马我不卡手机在线观看| 日本亚洲免费不卡| 欧美男女舔逼舔鸡巴视频| 我想看操小嫩逼大片| 91热国产在线观看| 美国毛片亚洲社区成人看| 精品福利一区二区三区在线观看| 国精品午夜福利视频导航| 欧美一区二区三区刘玥| 精品一二三四区中文字幕| 免费观看的黄视频一级国产| 国产欧美日本韩国一区二区| 国产成人AV剧情| 国产色哟哟精选在线播放| 丁香婷婷色婷婷粗大| 色逼色逼色逼色逼色逼色| 国产精品三二一免费| 日韩视频无码日韩视频又2020| 9国产亚洲精品国产| 99热这里只有精品亚洲| 国产精品538一区二区在线| 久久婷婷综合五月一区二区| 欧美一区二区三区四公司| 少妇无码一区二区二三区| 日韩欧美一区二区三区在线视频| 久久久一区二区三区日本| 婷婷激情五月天四房| 亚洲午夜av一区二区三区| 亚洲国产国产综合一区首页| 欧美尤物操逼毛茸茸真爽| 性一交一子一伦一乱| 夫妻性生活在线免费视频| 伊人网在线免费视频| 亚洲午夜国产片在线观看| 欧美精品国产一区二区在线观看| 国产区高清在线一区二区三区| 日本a国产精品久久久久|