欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Today’s heat treatment processes we share include: quenching, tempering, nitriding, cryogenic, oxidation and other processes. So what do these processes mean?

quench

What is quenching?

After austenitizing, the steel is cooled at an appropriate cooling rate to make martensite and other unstable structural transformation occur in the whole or a certain range of the cross section of the workpiece.

What's Differences between the Main Five Hot Processing Methods 2

Purpose of quenching

1) Improve the mechanical properties of metal products or parts. For example: improve the hardness and wear resistance of tools and bearings, improve the elastic limit of springs, and improve the comprehensive mechanical properties of shaft parts.

2) Improve the material properties or chemical properties of some special steels. Such as improving the corrosion resistance of stainless steel and increasing the permanent magnetism of magnetic steel.

tempering

What is tempering?

The quenching workpiece is heated to an appropriate temperature below the critical point AC1 for a certain period of time, and then cooled by a satisfactory method to obtain the required microstructure and properties

What's Differences between the Main Five Hot Processing Methods 3

What is the purpose of tempering?

1) To reduce the internal stress and brittleness, there is a great deal of stress and brittleness in the quenched parts. If it is not tempered in time, it will produce deformation and even cracking.

2) Adjust the mechanical properties of the workpiece. After quenching, the workpiece has high hardness and brittleness. In order to meet the different performance requirements of various workpieces, the hardness, strength, plasticity and toughness can be adjusted by tempering.

3) Stable workpiece size. By tempering, the metallographic structure tends to be stable, so as to ensure that no deformation will occur in the future.

4) The machinability of some alloy steels is improved.

nitridation

What is nitriding?

Nitriding treatment is a kind of chemical heat treatment process in which nitrogen atoms penetrate into the surface of workpiece in a certain medium at a certain temperature.

What is the purpose of nitriding?

The product has excellent wear resistance, fatigue resistance, corrosion resistance and high temperature resistance. Nitriding treatment is a kind of chemical heat treatment process in which nitrogen atoms penetrate into the surface of workpiece in a certain medium at a certain temperature.

Deep cold

What is deep cold?

Cryogenic treatment is to place the metal in – 160 ° The soft retained austenite is almost completely transformed into high strength martensite by treatment below C.

The purpose of deep cold?

Eliminate retained austenite (the retained austenite is about 8-20% after quenching and tempering, because the austenite is very unstable, it is easy to transform into martensite when it is subjected to external force or environmental temperature change, and the volume of martensite is larger than austenite, which will cause irregular expansion of the material and reduce the dimensional accuracy of the workpiece). After deep cooling, the retained austenite is reduced to less than 2%, which reduces the residual stress It makes the metal matrix more stable, increases the strength and toughness of the metal material, and significantly improves the red hardness.

oxidation

What is oxidation?

Dense and protective oxide film is formed on the surface of iron and steel parts by oxidation treatment. The main component is magnetic iron oxide (Fe3O4), which has the function of anti adhesion. The FES film obtained by surface vulcanization can have the function of anti-wear and anti adhesion. At the same time, it can improve the corrosion resistance and high temperature oxidation resistance.

What is the difference between different processes and workpieces?

Do you think the above technologies are not clear enough? So, the small Olympics will show you intuitively what are the differences in the appearance of different processes?

Quenching and temperingWhat's Differences between the Main Five Hot Processing Methods 4

What's Differences between the Main Five Hot Processing Methods 5

The color is gray cyan

Deep cold

There is frost on the surface, so hands can’t touch it directly

nitridationWhat's Differences between the Main Five Hot Processing Methods 6

What's Differences between the Main Five Hot Processing Methods 7

The surface is white and gray

It can be seen intuitively from the picture that firstly, the color of the workpiece will change, and secondly, the process is inseparable. If a workpiece needs higher hardness, it can be achieved by heat treatment.

For example, a mold can only be made of 10000 samples, but now it can be made of 100000 or even 1000000 samples by heat treatment, which greatly improves the utilization rate.

コメントを殘す

メールアドレスが公開されることはありません。 が付いている欄は必須項(xiàng)目です

精品一区二区三区乱码中文字幕| 非洲男生操男生屁眼视频| 2021国产一区二区岛国| 藏经阁91福利私人试看| 少妇毛片一区二区三区免费视频| 亚洲综合无码一区二区丶| 亚洲AV天堂一区二区香蕉| 伊人网在线免费视频| 国产伦精品一区二区三区福利| 影音先锋亚洲中文综合网| 啦啦啦视频在线手机播放| 男人的天堂久久久久久久| 中文字幕在线资源第一页| 骚穴手机在线视频| 欧美国产综合日韩一区二区| 欧美精品第15页| 少妇勾搭外卖员在线观看| 精品日本一区二区三区视频播放| 日本黄色美女射精| 看女生b免费视频| 干美妞肛门在线播放| 在线免费观看一区二区三区| 777米奇在线视频无码| 国产精品你懂的在线资源| 一区二区三区中文字幕免费在线| 中文字幕无码区一区二区| 日本熟妇一区二区三区四区| 一区二区三区四区五六区| 日韩 欧美 一区 二区三区| 精品福利一区二区三区在线观看| 日韩有码视频在线| 男插女下面高潮视频| 人人妻人人澡精品99| 男人的下面进女人的下面在线观看| 久久免费国产视频| 欧美精品第一区二区三区| 黑人大鸡巴日小逼| 丰满少妇被强入在线观看| 男生操女生无马赛克免费| 日本成人精品一区二区三区| 9亚洲导航深夜福利亚洲|