欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Shape tolerance refers to the allowable variation of the shape of a single material element, including roundness, cylindricity, planarity, line profile, face profile and straightness. It is the geometrical tolerance of the tested element, which is independent without any error to the datum.

What You Should Know about Tolerance 2

Selection principle

On the premise of meeting the functional requirements of parts, considering the process economy and detection conditions, the most economical tolerance value is selected. It is also necessary to consider the functional requirements, structure and rigidity of the parts, determine the tolerance value according to the tolerance table, and consider the coordination relationship between the tolerance values.

The given shape tolerance of the same element shall be less than the position tolerance, and the shape tolerance of cylindrical parts shall be less than the dimension tolerance. Generally, 30% of the dimension zone shall be selected in the sample stage, 40% in the small batch stage, and 60% to 80% in the large batch stage, depending on the difficulty of processing the workpiece.

Coordinate the relationship with the surface roughness. The surface roughness value is 20% to 30% of the shape error.

Flatness tolerance level shall be lower than perpendicularity and parallelism tolerance level; roundness tolerance level shall be lower than radial circular run out tolerance level.

The problem composition of shape tolerance:

  1. Cylindricity out of tolerance
What You Should Know about Tolerance 3
  • Straightness and flatness out of tolerance
What You Should Know about Tolerance 4

3.Out of tolerance of line profile and surface profile

What You Should Know about Tolerance 5

Cause analysis:

Irregular operation of employees

1. The installation error of the tool and workpiece is not verified when the tool is replaced

2. Rough operation when changing workpieces

Caused by machine

1. When the spindle bearing of the machine tool is worn or loose due to the rotation error of the machine tool, the out of tolerance of roundness, cylindricity and flatness will occur;

2. If the bearing of the lathe machining center is worn or loose, the roundness and cylindricity will be out of tolerance;

3. The geometric relationship between the feed motion and the main motion is not correct: if the tool’s motion path is not vertical to the workpiece’s rotation axis, cylindricity error will be generated, and if the uneven line, flatness error will be generated;

4. The straightness error of machine tool guide rail in horizontal or vertical plane causes roundness or flatness error in machining indication;

Material cause

1. The shape and size change caused by the eccentric workpiece processing, and the cylindricity is mostly out of tolerance;

2. Because of the change of workpiece material, the hardness of material is mostly related to heat treatment;

3. When the residual stress of workpiece is released, the thickness of workpiece is not consistent, which has a great influence, and the majority of workpiece is blank;

Caused by process design system

1. The mechanical deformation of the process system and the thermal deformation of the process system are not fully considered in the process design.

2. It is difficult to machine materials, and the tool durability is not fully considered.

3. The tool is not rigid enough.

4. Environmental temperature difference is also a major factor.

Develop Interim Measures

Out of tolerance of shape and size caused by improper operation of operators

On site training and guiding the operation methods of the processing personnel, so that the operators can operate correctly and complete the parts processing

Shape and size out of tolerance caused by machine

1. If the order is urgent and there is no maintenance time, the dial indicator can be used to adjust the bearing clearance and complete the emergency production order.

2. Check whether the temperature rise of each part of the machine tool is consistent, whether it is due to the change of the temperature rise of the machine tool, the change of the original static geometric dimension of the machine tool, and the change of the processing track. The machine tool can reach the heat balance state by preheating the machine tool. If not, change the program control value first to complete the emergency order.

3. The straightness error of machine tool guide rail in horizontal or vertical plane causes roundness or flatness error in machining indication, and the relative displacement direction is adjusted from tangent direction to normal direction.

Develop permanent measures

The shape and size out of tolerance caused by the operator’s irregular operation.

Standardize the operation steps, standardize the placement standards of workpieces, and form the operation instructions to guide the standardized production of workers.

Shape and size out of tolerance caused by machine

1. Check the main shaft bearing, correct or replace the high-precision bearing, and improve the assembly quality of the main engine;

2. 2. Correct the static geometric dimension of machine tool installation;

Out of tolerance of shape and size caused by materials

1. Calculation of workpiece eccentricity and reasonable counterweight

2. Whether the heat treatment process of workpiece material is reasonable and in accordance with the standard

3. Improve workpiece clamping conditions through tooling design

Shape and size out of tolerance caused by process system

Standardized control of documents: tool design, whether machining error calculation is reasonable, whether cutting parameters are reasonable, tool geometry, whether stress calculation is accurate in machining process, whether static stress of process system is reasonable, whether arrangement of process route is reasonable, whether machining structure of parts has concentration of residual stress, whether adopting reasonable heat treatment process, workpieces Whether there is residual stress in the shaping process.

What You Should Know about Tolerance 6
阴茎大头插少妇蜜穴视频| 91精品国产综合久久久蜜| 日韩精品一区二区天堂| 色狠狠久久av北条麻妃| 999久久久国产大美腿| 国内精品久久久久精品97| 丁香婷婷亚洲六月综合色| 91在线一区二区| 国产剧情使劲操我逼| 日韩视频无码日韩视频又2020| 无码av一区二区大桥久未| 99爱这里只有精品| 中文字幕乱码一区二区三区麻豆| 在线免费观看一区二区三区| 激烈18禁高潮视频免费| 欧美一区二区三区四区五区精品| 国内精品久久久久精品97| 久久免费国产视频| 久久久精品日韩一区二区三区| 蜜臀AV无码国产精品尤物| 强伦人妻一区二区三区视频18| 日韩人妻精品一区二区三区| 美女麻豆颜色光屁股眼子| 美女骚逼被操出白浆| 国产精品自在自线。| 色偷偷影音先锋男人av| 国产精品熟女一区二区三区久久夜| 日韩人妻精品一区二区三区| 色欲色欲色视频综合| 爱爱视频小抽插动漫| 国产综合精品一区二区青青| 另类亚洲欧美专区第一页| 挺进绝色邻居的紧窄小肉| 中文字幕av一区二区三区蜜桃| 大鸡巴射精在小穴动漫版| 欧美日韩亚洲人人夜夜澡| 免费男人和女人黄片| 性一交一子一伦一乱| 国内不卡的中文字幕一区| 插我舔内射18免费视频| 欧美人与动人物A级|