欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Base knowledge of titanium

Titanium is an important structural metal developed in the 1950s. Titanium alloys are widely used in various fields because of their high specific strength, good corrosion resistance and high heat resistance. Many countries in the world have recognized the importance of titanium alloy materials, and have successively studied and developed them, and obtained practical application. Titanium is the fourth B element in the periodic table. It looks like steel and has a melting point of 1 672 C. It is a refractory metal. Titanium is abundant in the crust, far higher than common metals such as Cu, Zn, Sn and Pb. Titanium resources in China are extremely abundant. Only in the super-large vanadium-titanium magnetite discovered in Panzhihua area, Sichuan Province, the associated Titanium reserves amount to about 420 million tons, which is close to the total proved Titanium reserves abroad. Titanium alloys can be divided into heat resistant alloys, high strength alloys, corrosion resistant alloys (Ti-Mo, Ti-Pd alloys, etc.), low temperature alloys and special functional alloys (Ti-Fe hydrogen storage materials and Ti-Ni memory alloys).

Elements of Titanium Alloy

Titanium alloys are alloys based on titanium and added with other elements. Titanium has two kinds of homogeneous heterogeneous crystals: alpha titanium with dense hexagonal structure below 882 C and beta titanium with body-centered cubic structure above 882 C. The alloying elements can be divided into three categories according to their influence on the phase transformation temperature: 1. The elements that stabilize the alpha phase and increase the phase transformation temperature are alpha stable elements, including aluminium, carbon, oxygen and nitrogen. Among them, aluminium is the main alloy element of titanium alloy. It has obvious effect on improving the strength at room temperature and high temperature, reducing specific gravity and increasing elastic modulus of the alloy. (2) The stable beta phase and the decreasing phase transition temperature are beta stable elements, which can be divided into two types: isomorphic and eutectoid. The former includes molybdenum, niobium and vanadium, while the latter includes chromium, manganese, copper, iron and silicon. (3) Neutral elements, such as zirconium and tin, have little effect on phase transition temperature.

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys.  Oxygen and nitrogen have higher solubility in the alpha phase, which has a significant strengthening effect on titanium alloy, but reduces its plasticity. Oxygen and nitrogen contents in titanium are usually stipulated to be below 0.15-0.2% and 0.04-0.05% respectively. The solubility of hydrogen in the alpha phase is very small. The excessive hydrogen dissolved in the titanium alloy will produce hydride, which makes the alloy brittle. Usually hydrogen content in titanium alloys is controlled below 0.015%. The dissolution of hydrogen in titanium is reversible.

Structure and Classification of Titanium Alloys 2

classification

Titanium is an isomer with a melting point of 1720 (?) C and a dense hexagonal lattice structure at temperatures below 882 (?), which is called alpha titanium, and a body-centered cubic lattice structure at temperatures above 882 (?) C, which is called beta titanium. Titanium alloys with different microstructures can be obtained by adding appropriate alloying elements to change the phase transformation temperature and phase content gradually. Titanium alloys have three kinds of matrix structures at room temperature. Titanium alloys can also be divided into three categories: alpha alloys, (alpha+beta) alloys and beta alloys. China is represented by TA, TC and TB respectively.

Alpha titanium alloy

It is a single-phase alloy consisting of alpha-phase solid solution. It is alpha-phase both at general temperature and at higher practical application temperature. It has stable structure, higher wear resistance and strong oxidation resistance than pure titanium. Its strength and creep resistance are maintained at temperatures of 500 600 C, but it can not be strengthened by heat treatment, and its strength at room temperature is not high.

Beta titanium alloy

It is a single-phase alloy composed of beta-phase solid solution. It has high strength without heat treatment. After quenching and aging, the alloy is further strengthened, and its room temperature strength can reach 1372-1666 MPa. However, its thermal stability is poor and it is not suitable for use at high temperature.

Alpha+beta titanium alloy

It is a dual-phase alloy with good comprehensive properties, good structural stability, good toughness, plasticity and high temperature deformation properties. It can be processed under hot pressure and strengthened by quenching and aging. After heat treatment, the strength increases by 50%-100% compared with annealing state, and the high temperature strength can work for a long time at the temperature of 400 500 and its thermal stability is inferior to that of alpha titanium alloy.

Among the three kinds of titanium alloys, Alpha-titanium alloy and alpha+beta-titanium alloy are most commonly used; Alpha-titanium alloy has the best machinability, followed by alpha+beta-titanium alloy and beta-titanium alloy. Alpha titanium alloy code TA, beta titanium alloy code TB, alpha + beta titanium alloy code TC.

Structure and Classification of Titanium Alloys 3

Application of titanium alloy

Titanium alloys can be divided into heat resistant alloys, high strength alloys, corrosion resistant alloys (Ti-Mo, Ti-Pd alloys, etc.), low temperature alloys and special functional alloys (Ti-Fe hydrogen storage materials and Ti-Ni memory alloys). The composition and properties of typical alloys are shown in table.

Different phase composition and structure can be obtained by adjusting the heat treatment process. It is generally believed that fine equiaxed structure has better plasticity, thermal stability and fatigue strength; acicular structure has higher endurance strength, creep strength and fracture toughness; equiaxed and acicular mixed structure has better comprehensive properties.

Titanium alloys have high strength, low density, good mechanical properties, good toughness and corrosion resistance. In addition, titanium alloy has poor technological performance and difficult cutting. It is easy to absorb impurities such as hydrogen, oxygen, nitrogen and carbon in hot working. There are also poor wear resistance and complex production process. The industrialized production of titanium began in 1948. With the development of aviation industry, the titanium industry is growing at an average rate of 8% per year. At present, the annual output of titanium alloy processing materials in the world has reached more than 40,000 tons, and there are nearly 30 kinds of titanium alloy grades. The most widely used titanium alloys are Ti-6Al-4V (TC4), Ti-5Al-2.5Sn (TA7) and industrial pure titanium (TA1, TA 2 and TA3).

Titanium alloy is mainly used to make compressor parts of aircraft engine, followed by rocket, missile and high-speed aircraft. In the mid-1960s, titanium and its alloys have been used in general industry to make electrodes in electrolysis industry, condensers in power plants, heaters for petroleum refining and seawater desalination, and environmental pollution control devices. Titanium and its alloys have become a kind of corrosion resistant structural material. In addition, it is also used to produce hydrogen storage materials and shape memory alloys.

Titanium and titanium alloys were studied in 1956 in China, and industrialized production of titanium materials and TB2 alloys were developed in the mid-1960s.

Titanium alloy is a new important structural material used in aerospace industry. Its specific gravity, strength and service temperature are between aluminium and steel, but it has high specific strength and excellent seawater corrosion resistance and ultra-low temperature performance. In 1950, the U.S. first used F-84 fighter bomber as non-load-bearing components such as rear fuselage heat insulation plate, air guide hood and tail hood. Since the 1960s, the use of titanium alloys has shifted from the rear fuselage to the middle fuselage, partially replacing structural steel to manufacture important load-bearing components such as partitions, beams, flaps and slides. The amount of titanium alloy used in military aircraft increases rapidly, reaching 20%-25% of the weight of aircraft structure. Titanium alloys have been widely used in civil aircraft since the 1970s. For example, the amount of Titanium used in Boeing 747 passenger aircraft is more than 3640 kg. Titanium for aircraft with Mach number less than 2.5 is mainly used to replace steel in order to reduce structural weight. For example, the United States SR-71 high-altitude high-speed reconnaissance aircraft (flying Mach number of 3, flying altitude of 26,212 meters), titanium accounted for 93% of the aircraft’s structural weight, known as “all-titanium” aircraft. When the thrust-weight ratio of aero-engine increases from 4 to 6 to 8 to 10 and the outlet temperature of compressor increases from 200 to 300 degrees C to 500 to 600 degrees C, the original low-pressure compressor disc and blade made of aluminum must be replaced by titanium alloy, or the high-pressure compressor disc and blade made of titanium alloy instead of stainless steel, in order to reduce the structural weight. In the 1970s, the amount of titanium alloy used in aero-engines generally accounted for 20%-30% of the total weight of the structure. It was mainly used to manufacture compressor components, such as forged titanium fans, compressor discs and blades, cast titanium compressor casing, intermediate casing, bearing housing, etc.  Spacecraft mainly utilizes the high specific strength, corrosion resistance and low temperature resistance of titanium alloy to manufacture various pressure vessels, fuel tanks, fasteners, instrument straps, frameworks and rocket shells. Titanium alloy plate weldments are also used in artificial earth satellites, lunar module, manned spacecraft and space shuttles.

日韩人妻精品一区二区三区99| 高清无码精品一区二区三区| 亚欧日韩国产在线| 操俄罗斯美女bb| 黄网官方在线观看| 潮中文字幕在线观看| 大几吧插进小穴视频| 久久国产精品成人18p| 青青视频在线人视频在线| 国产熟女50岁一区二区| 欧洲美熟女乱又伦| 免看一级a一片成人欧美| 男人操女人下面国产剧情| 亚洲Av无码专区一区二区三区| 欧美高清在线观看一区二区三区| 老湿机69福免费破解版| 中文字幕人妻一区二区三区久久| 亚洲综合色88综合天堂| 久久久久久久久中文字幕| 99爱国产精品免费视频| 少妇无码一区二区二三区| 瓯美在线免费视频笫一区第二区| 国产精品国产三级国| 美女最骚逼逼视频| 免费女人男人肏逼| 色逼色逼色逼色逼色逼色| 美女嫩逼插进大屌| 少妇无码一区二区二三区| 草草久性色av综合av| 9亚洲导航深夜福利亚洲| 欧美一区二区三区男人的天堂| 亚洲一区二区女同性恋免费看| 美女被插入小穴涩涩视频| 黑丝美女被操哭边操边尿| 亚洲av无一区二区三区综合| 九九热在线精品免费看| 亚洲国产嫩草18久久久| 彩虹网免费视频在线观看| 欧美另类在线观看| 午夜场射精嗯嗯啊啊视频| 91精品国产综合久久久蜜|