欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Cemented carbide has been used for nearly a century. During this period, they have become common materials for manufacturing tools and all applications requiring high hardness and certain toughness. Because resilience and strength often come under different names, their users sometimes mistake them for each other. This proves that people generally lack sufficient knowledge of cemented carbide.

TRS – transverse fracture strength

Determination of transverse fracture strength of cemented carbide: ISO 3327

The strength of cemented carbide is measured by TRS, which is a simple three-point bending test. The TRS value represents the relative strength of the tool. TRS test is also an indicator of product quality level. Cemented carbide is a relatively brittle material, its strength is greatly affected by inherent defects and defects. Therefore, the standard deviation CA of TRS average value and TRS value can also be used as the quality and performance index of cemented carbide. The TRS value of cemented carbide can be increased by increasing binder content and using smaller grain size

According to experience, the tensile strength of WC is about half of the transverse fracture strength.

The values of the transverse fracture strength of the cemented carbide grades appearing in the performance tables of different suppliers are based on the above-mentioned standard tests, so only the mechanical strength of the sample size is reflected. Many application engineers usually take TRS value as the design strength value of a certain level, and use it to specify that a certain level should play a role in a specific application, expecting the value to be true. In fact, these values decrease with the increase of part size, and the design strength value of larger parts must be based on the size effect. Therefore, the fracture toughness is a good index to evaluate the performance of end mills.

Fracture toughness strength

Finding the exact solution to the impact problem can be very complex. The impact stress formula shows that the stress changes directly with the elastic modulus, so the cemented carbide with high elastic modulus is not suitable for all impact applications. However, considering the hardness of cemented carbide, especially the higher bond grade with 25% cobalt binder and coarser grain structure, it shows surprisingly high impact strength.

The transverse fracture strength (TRS) is usually mistaken as an index to evaluate the impact resistance of cemented carbide. In fact, the fracture toughness is a better index to evaluate the impact resistance of cemented carbide. As shown in the figure, the fracture toughness varies with the grain size and binder content. For more information, see palmqvist indentation test below.

Strength or Toughness Attributing to Cemented Carbide 2

Adhesive strength

The binder of most tungsten carbide brands is cobalt. In a rotating tool, the binder is added as a weight percentage, which varies from 3% to 15%. The amount of binder is a very important factor in determining the performance of each grade. According to experience, the lower the cobalt content, the harder the material will be. However, changes in particle size and additives can undermine this rule.  

The key point to note is that the percentage of cobalt is “by weight.”. If you have a cobalt end mill in one hand and a carbide end mill in the other, you will feel the difference in weight. When we say it’s a 10% or 12% weight of cobalt, it’s actually a larger amount by volume. By weight, 12% of cobalt can be converted to more than 20% by volume. The increase in cobalt content usually increases the transverse fracture strength and “toughness” required for micro end mills, but you will sacrifice some “hardness”

Binder Strength

Indentation is a common method to determine the toughness of cemented carbide. The fracture toughness of the material is characterized by the critical stress intensity factor K1C. The results of the toughness test show that the fracture toughness of the material increases with the increase of cobalt content and WC grain size.

Compressive Strength 

This property is also one of the most important properties of cemented carbide. The ductile material will expand or expand without fracture under compression load, but the brittle material will fail, which is mainly due to shear fracture rather than true compression. Compared with most other materials, cemented carbide shows high compressive strength, and the value increases with the decrease of binder content and grain size. According to the grain size and binder content, the value of cemented carbide is usually between 400k-900kpsi (7kn / m2)

Flexural strength

Strength or Toughness Attributing to Cemented Carbide 3

The flexural strength of material refers to its ability to resist deformation under load. For materials with significant deformation but no fracture, the yield load (usually measured at 5% deformation / strain of the outer surface) is reported as either flexural strength or flexural yield strength.

欧美一级淫片免费播放口| 久久精品一区二区三区免费看| 日本人妻与家公的伦理片| A级毛片毛片免费观看久| 在线观看国产日韩欧美一区二区| 藏经阁91福利私人试看| 国产一区二区三区在线观| 开心五月播五月亚洲第一| 夫妻性生活在线免费视频| 久久精品欧美精品免费观看| 中文字幕乱码一区二区三区麻豆| 日本高清一区二区三区不卡| 日韩av一区二区高清不卡| 男的鸡巴插女的视频| 久久久国产了楼凤| 久久久国产了楼凤| 欧洲美熟女乱又伦| 久久久精品欧美一区二区三免费| 嗯嗯好硬好大啊老公| 国产剧情使劲操我逼| 日韩有码视频在线| 大鸡吧天天草黑逼| 欧美日韩综合在线一区| 美女露胸露逼逼自慰| 日韩欧美一区二区三区在线视频| 日韩毛片一区视频免费在线观看| 人人摸人 人干人人草操| 韩国三级a视频哪里看| 日本不卡免费一区二区视频| 国产高清一区二区三区四区色| 又色又爽又黄的吃奶Av| 午夜十八禁福利亚洲一区二区| 中国美女操逼的视频| 狂插美女大屁股在线观看| 两人爽爽爽无码免费视频| 日本免费暖暖在线小视频| 三级片成人京东热五月天| 欧美大鸡巴插入骚b| 精品久久久久五月婷五月| 一级毛片完整版免费播放一区| 91在线一区二区|