欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

general boring bar image

Broadly used in holes processing, boring bars are a kind of component assembled to boring bits  broaching holes that have already been preliminarily drilled and improve hole diameter accuracy. They consist of solid shank and a coolant hole in it.

If you happen to be familiar with long overhang machining, probably you also have been haunted by an underlying problem that all single-point cutting tools with long shank can’t skirt around, which is vibration, or so-called chatter.

Main reasons that cause machining chatter

  1. Length of it exceeds 125mm,
  2. Its rotating rate per min is too high,
  3. Loose clamping of tool or workpiece.
working status

Why is reducing chatter so vital to drilling process?  

At present, in internal hole processing, ratio of length-to-diameter of a boring bar extension is generally less than 4:1. Once the ratio is more than that, the tool body will vibrate violently, resulting in poor tolerance of machined hole that can not meet requirements of product surface roughness.

Are there some other solutions to fix the problem?

Yes, basically veterans try the following 2 tips to alleviate chatter,

  1. Choose inserts with a smaller cutting edge angle. It will improve the whole tool’s performance of heat dissipation as well,
  2. Either lower feed rate or rotating rate of the spindle.

Nonetheless, you will find it still hardly improve the accuracy of machining due to limited cutting parameters. It inevitably moderates the metal removal rate per unit time.

That’ s why we suggest you solve this problem from the ground up. For clients from the industry of tool fabrication, we recommend carbide boring tool holders (tool bit excluded) available in our stock. Boring bits assembled on it efficiently are allow to enhance its capability against disastrous processing result caused by vibration and cutting heat. Tool bit can be tightened by being screwed with threads carved in its shank’s internal hole.

How does it profit you if your boring bars are made of carbide?

It’s easily for low carbon steel to reach required rigidity of external turning tool and end face turning tool cause their overhang part out of spindle is generally not be too long. Whereas all boring bars have to be designed as slim as possible for readily protruding into machined hole in the long-reach application. They are way more vulnerable versus other types of lathe bars bearing chatter. Manufacturers have to develop suitable materials on that purpose, e.g. carbon steel, tungsten alloy, and carbide.

ground boring bar

Under what circumstance should carbide boring bar be applied?

As we mentioned above, the length-to-depth ratio is a critical factor to affect what material to be used in the fabrication of a lathe boring bar. Steel carbon allows a 4:1 ratio, and tungsten alloy allows ratio of more than 4:1. Carbide is one of those optimal solutions for those boring bars in ratio up to 8:1 thanks to carbide’s high rigidity.

Why choose Mcct?

Please save your time sourcing manufacturer with design ability and full production line.

why do we choose Mcct

As an enterprise that has been in the business of carbide parts and produced them for 11 years. We are able to assure you that all parts are made in our wholly-owned factory operated under the instruction of ISO 9001. Sufficient expertise is obtained by us to tailor a series of carbide products for meeting requirements from our clients.

Product description

There are 3 types of boring bars you could find in our store. They are ST(standard), CL, and CN.

product description

As shown in the following chart, we’ve made a list of common ST type boring bars. You could check out if there happens to be certain one of size that you need. Otherwise, please just contact our service personnel for all detailed info.

ST type
L(mm)φDφD1M
10084.5M4
 80-150 10 5.5 M5
 100-200 12 6.5 M6
 100-200 15 8.5 M8
 100-200 15.6 8.5 M8
 100-250 16 8.5 M8
 150-250 19 10.5 M10
 100-250 20 10.5 M10
 150-300 24 12.5 M12
 150-300 25 12.7 M12
 200-400 32 17M16
CN type
CL type

Instruction of use

Please pay attention to the limitations of the depth-to-length ratio. Boring bar will get broken If the overhang part of shank scales out the limitation.  

Reserve enough space for flushing the swarf, which means you should choose a boring bar with a suitable size according to the diameter and depth of the machined hole

If encounter problem about our products that you can’t figure out, please contact us directly or the agency where you purchase the item.

What’s more

We will launch solid boring toolbars and V-shaped welded boring bars in the near feature. Please subscribe to our blog you will be updated with more product details and tips of operating. We genuinely hope our insistence on the highest of standards of products we provide is able to convey the enticing values the tool manufacturer has to offer and impress you someday.

SOLID TYPE boring bar
chevron welded boring bar

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

女人逼逼出水视频| 日本 日韩 欧美| 天天天天天干夜夜夜夜夜操| 欧美 亚洲 日本 国产| 国产 欧美 日韩 黄片| 国产品无码一区二区三区在线| 国产精品亚洲综合av| 美女裸胸屁股视频| 国产激情内射免费精品| 午夜性福福利视频一区二区三区| 乱伦美女小骚货视频| 黄色av成年人在线观看| 99爱国产精品免费视频| 蜜臀av一区二区三区免费观| 欧美国产中文高高靖| 成人av大全免费一区二区三区| 欧美一区二区三区男人的天堂| 鸡巴抽插逼逼视频| 亚洲中文字幕在线无码一区二区| 亚洲v国产v天堂a无码| 视频在线观看一区@99| 啊啊啊别操了视频| 日日狠狠久久888av| 国产综合精品一区二区青青| 大鸡巴插入骚穴在线观看| 日本人妻与家公的伦理片| 亚洲av无一区二区三区综合| 一级特一黄大片欧美久久| 18岁以下禁看美女的胸| 天天日天天干天天天天操| 日韩精品无码一区二区三区不卡| 国产精品亚洲一区二区三区下载| 日韩有码视频在线| 黄片观看骚货浪荡| 97人人澡人人爽人人揉| 人妻波多野结衣爽到喷水| 伊人久久久久久久久香港| 亚洲高清无遮挡在线观看| 几巴怪物操逼视频| 欧美日本大白屁股大黑逼操逼视频| 好想大鸡巴插进阴道视频|