欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Burr in metal processing is a problem that everyone will encounter, such as drilling, turning, milling, plate cutting, etc. One of the hazards of burr is easy to cut. In order to remove burr, it is usually necessary to carry out a secondary operation called deburring. The three deburring and edge finishing of precision parts may account for 30% of the cost of finished parts. In addition, the secondary finishing operation is difficult to automate, so burr has become a very difficult problem.How to Effectively Deal with Burr 2

Here are all the machining problems that bothered us

How to Effectively Deal with Burr 3

B

How to solve burr

1. chemical deburring

Chemical deburring is the use of chemical energy for processing, chemical ions will adhere to the surface of the parts, forming a film with high resistance and low conductivity to protect the workpiece from corrosion, and the burr can be removed by chemical action because it is higher than the surface. This deburring method is widely used in pneumatic, hydraulic, engineering machinery and other fields.

2. high temperature deburring

First, put the parts to be deburred into the tight sealing chamber, and then put them into the hydrogen oxygen mixture with a certain pressure, ignite the mixture to explode, release heat, and burn off the burr of the parts without damaging the parts.

3.hobbing deburring

The parts and abrasives are put into the closed drum together. During the rotation of the drum, the dynamic torque sensor, parts and abrasives are grinded together to remove the burr. Abrasives can be quartz sand, sawdust, alumina, ceramics and metal rings, etc.

4.manual deburring

This method is more traditional and the most time-consuming and laborious. Mainly through manual use of steel file, sandpaper, grinding head and other tools for grinding. Now the most commonly used in production is trimming knife.

How to Effectively Deal with Burr 4

5. process deburring

Edge rounding can refer to all actions to remove the edge of metal parts. However, it is usually associated with the radius at which the part edge is created.

How to Effectively Deal with Burr 5

Corner rounding

Edge rounding is not simply to remove sharpness or burr, but to break the edge of metal parts to improve their surface coating and protect them from corrosion.

Rotary setback: suitable for laser cutting, stamping or machining the edge of parts.

How to Effectively Deal with Burr 6

Manual grinding machine: suitable for metal processing projects requiring grinding and edge rounding or deburring.

How to Effectively Deal with Burr 7

Burr in special difficult milling parts

In milling parts, deburring is more complex and costly, because multiple burrs are formed in different positions of different sizes. At this time, it is very important to choose the right process parameters to minimize the burr size.

main factors affecting burr formation in end milling

① Milling parameters, milling temperature and cutting environment have certain influence on the formation of burr. The influence of some main factors such as feed speed and milling depth is reflected by the plane cutting angle theory and the tool tip exit sequence EOS theory.

How to Effectively Deal with Burr 8

② The better the plasticity of the workpiece material, the easier it is to form I-type burr. In the process of end milling brittle materials, if the feed rate or plane cutting angle is large, it is conducive to the formation of type III burr (defect).

③ When the angle between the end face of the workpiece and the machined plane is greater than the right angle, the formation of burr can be restrained due to the increased support stiffness of the end face.

④ The use of milling fluid can prolong the tool life, reduce the tool wear, lubricate the milling process, and reduce the burr size.

⑤ Tool wear has a great influence on the formation of burr. When the tool is worn to a certain extent, the arc of the tool tip increases, not only the size of the burr in the exit direction of the tool increases, but also the burr in the cut in direction

⑥ Other factors such as tool material also have some influence on the formation of burr. Under the same cutting conditions, diamond tool is more conducive to restrain burr formation than other tools.

Using appropriate cutting conditions to restrain burr

It is an effective method to eliminate the space of burr in order to restrain the burr. For example, chamfering can be used to reduce the space before cutting.

In order to reduce the cutting residue as much as possible, the most suitable tool and cutting condition must be selected. The cutting tool with large rake angle and sharp cutting edge is selected to improve the cutting speed and cutting characteristics. Especially in finishing cutting, the minimum cutting depth and feed must be used.

The space between the tool and the workpiece determines the size of the burr. Let’s take a look at the following diagram.

How to Effectively Deal with Burr 9

In fact, burr can not be avoided in the process of processing, so it is better to solve the burr problem from the process and avoid excessive manual intervention. The use of chamfered end milling cutter can reduce the burr space, effectively remove burr, and is also a very suitable method to remove burr.

男人的下面进女人的下面在线观看| 国产精品一区二区三区色噜噜| 人妻少妇精品视频12p| 中文字幕乱码一区二区三区麻豆| 欧美亚洲综合久久夜夜嗨| 久久精品一区二区三区免费看| 白色紧身裤无码系列在线| 国产精品白浆一区二区三区| 男人操女人黄片黄色| 人妻波多野结衣爽到喷水| 亚洲精品自拍偷拍第一页| 老头鸡巴操老太骚逼| 精品美女久久久久久嘘嘘| 91成人精品国语自产拍| 91kaobi视频在线| 伊人久久亚洲婷婷综合久久| 狠狠干无码日韩AV| 成人久久久久久蜜桃免费| 一区二区三区亚洲av| 男生和女人靠逼视频| 胸大裸体美女视频| 为什么搜索不到裸体| 中文无码av动作片| 日本六十五十熟女一级黄色| 美女被插入小穴爆操视频| 亚洲AV无码一区二区三区系列| 夜夜嗨av少妇一二三区| 亚洲综合青青草原在线| 尤物AV无码国产在线看| 91秦先生全集在线观看| 老头鸡巴操老太骚逼| 性色av少妇一区二区三区多人| 国产熟女露脸普通话对白| 国产一区二区三区午夜精品久久| 免费看澡美女逼视频看看| 大鸡吧小骚逼视频| 亚洲 欧美 精品 高清| 日本福利一区二区视频| 神马我不卡手机在线观看| 亚洲一区二区三区四区国产| 成人久久久久久蜜桃免费|