欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Non metallic inclusions mainly come from various types of non-metallic inclusion compounds formed by the corresponding increase of the compound equilibrium constants of oxygen, sulfur and nitrogen during the condensation of liquid steel. The product formed according to the chemical reaction shall be called non-metallic inclusions, or inclusions for short. Although the amount of inclusions in steel is small, it has a bad impact on the quality of steel materials and products. With the development of modern material engineering technology, the requirements for steel quality are becoming more and more strict. Therefore, in-depth discussion and Research on non-metallic inclusions will be of great significance to material identification, product fracture analysis, waste analysis and failure analysis.

Sources of nonmetallic inclusions in steel

The formation of inclusions is mainly due to a series of physical and chemical reactions during melting and solidification. According to their sources, they can be divided into endogenous (internal) inclusions and exogenous (external) inclusions.

How to distinguish inclusions in metals? 1

Endogenous inclusion

Endogenous inclusions refer to the products generated by the chemical reaction caused by the contact between various internal material components, or between the steel and the atmosphere and container in the furnace during the smelting, casting and condensation of steel, or the granular substances precipitated due to the decrease of solubility when the condensation temperature of liquid steel decreases.

Foreign inclusion

Foreign inclusions are also called external inclusions or accidental inclusions. It is the impurity mixed into the molten steel due to peeling off from the equipment or container in the process of smelting and casting production. In addition, sometimes due to the negligence of smelting operation, the refractory brick cracks and falls off due to thermal impact, forming products with other oxides and becoming foreign inclusions.

Effect of inclusions on steel quality

The harmfulness of inclusions depends on their quantity, shape, size, distribution, melting point and physical and chemical properties. When the inclusion has the property of low melting point, the steel will produce thermal brittleness and crack due to its melting or softening during hot working deformation. When there are aluminum inclusions or other nitrides in the steel, the surface hardness of the steel is uneven, resulting in difficulties in cold machining, cutting and grinding. When the inclusions in steel have exceeded the standard, it brings great difficulties to heat treatment and welding process, such as uneven infiltration layer of chemical heat treatment, greatly reducing the strength or cracking of weldments during welding, etc.

Metallographic identification of inclusions

In addition to the identification of the chemical composition and crystal structure of inclusions, the metallographic identification method can directly observe and identify the morphology, size, quantity, distribution and type of inclusions under the optical metallographic microscope. At the same time, the metallographic method also has the characteristics of simple operation and easy implementation.

Interception and preparation of metallographic samples

In order to ensure that the intercepted sample can represent the results of identifying non-metallic inclusions, the intercepted part shall meet the requirements of corresponding technical conditions. For the forging blank, samples can be taken from the center to the edge of the forging blank, such as the head, middle and tail of the forging blank; For rolled and cold drawn steel, it is appropriate to sample longitudinally through the center line; For quenching crack, forging crack, hot rolling, stamping, failure fatigue fracture, etc., samples shall be intercepted at the crack and fracture; For special steel or product parts, it can be carried out according to corresponding standards.

The metallographic sandpaper from coarse to fine shall be used in the grinding of the sample. The next grinding process shall be perpendicular to the grinding mark of the previous grinding process until the grinding mark disappears. In the polishing process, use appropriate pressure to make the polishing surface of the sample move back and forth at the radius of the polishing disc, and the sample itself should also rotate continuously. Finally, it is required that the sample is not etched in the 100 times field of view, and its surface is free of scratch, peeling, water mark, stain, flat and bright as a mirror.

Type and morphology of inclusions

Sulfides have high ductility, single gray inclusions with a wide range of morphology ratio (length / width), and generally have rounded ends; Most alumina particles are not deformed, angular, with small morphology ratio (generally < 3), and black or blue particles are arranged in a row along the rolling direction (at least three particles); Silicates have high ductility, single black or dark gray inclusions with a wide range of morphology ratio (generally ≥ 3), and generally have acute angles at the ends; Spherical oxides are undeformed, angular or circular, with small morphology ratio (generally < 3), black or blue, irregularly distributed particles; The shape of single particle spherical is circular or approximately circular, and the diameter is ≥ 13 μ M.

How to distinguish inclusions in metals? 2

Lascia un commento

Il tuo indirizzo email non sarà pubblicato. I campi obbligatori sono contrassegnati *

国产日韩一区二区三区在线播放| 神马我不卡手机在线观看| 欧美亚洲综合一区二区三区| 成人黄色网破处在线播放| 青青视频在线人视频在线| 无码爆一二三区免费视频| 大黑屌爆操日本女人| 69国产精品久久久久久人| 麻豆91精品96久久久| 狠狠五月激情综合去干网| 欧美 日韩 激情 在线| 最新黄色A级一短片| 天天天天天干夜夜夜夜夜操| 青青河边草直播免费观看| 中文无码av动作片| 有关日本黄色录像的视频| 欧美日本大白屁股大黑逼操逼视频| 一级毛片完整版免费播放一区| 西西大尺度无码免费视频| 亚洲国产一区二区不卡在线资源| 久久久五月性色视频| 丁香社区五月在线视频久| 国产成人精品免费视频全| 被几个大屌老外轮操| 久久久一区二区三区日本| 日本一区二区三区四区五| 日韩精品无码一区二区三区不卡| 日韩精品高清在线| 亚洲日韩不卡一区二区三区| 色欲精品一区二区三区AV| 九九视频精品只有这里有| 男女边吃奶边做边爱视频| 国产精品你懂的在线资源| 中文字幕国产精品一区二区三区| 被公侵犯人妻少妇一区二区三区| 操俄罗斯美女bb| 日韩欧美综合一二三区| 大鸡巴射在穴穴里的视频| 99热这里只有精品97| 久久久国产调教性奴| 欧美日韩久久久久久久久|