欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

When a user has the option between a replaceable insert end mill and a solid carbide end mill (hereafter referred to as “solid carbide end mill”), they typically ask a fundamental question: which tool offers better performance? In which machining fields does each tool have more advantages? Rather than being a question of which is superior, it is more about which is better suited to specific applications. Understanding the distinct performance characteristics of each type of tool and how to use them effectively to achieve good machining results is essential.

Generally, compared to traditional insert end mills, solid carbide end mills offer significantly higher machining precision. This fact holds true specifically for the performance of the tool during cutting operations. Although both types of tools may have the same dimensional precision grade, the rigidity of solid carbide material is much higher than that of a steel tool holder with insert blades. This means that solid carbide end bit mills are less likely to undergo deflection or deformation under cutting forces, leading to higher machining precision.

The 3 Elements You Should Take into Consideration when You Select End Mills 2

Base Material of Solid Carbide End Mills

The machining performance of solid carbide end mills largely depends on the type of carbide base material used. The base material is crucial because it must support the cutting edges of the tool, endure significant cutting forces, and prevent any form of tool damage.

To ensure that end mills have sufficient toughness and provide good dynamic resistance, solid carbide end mills typically use micro-grain carbide as the base material (see Figure 2). This base material offers higher hardness and better edge sharpness while maintaining good toughness. However, compared to conventional grain-sized carbide, micro-grain carbide has relatively poorer thermal conductivity (its ability to dissipate heat from the cutting area). This means that heat generated during cutting tends to remain on the tool surface. Therefore, the cutting edges of solid carbide end mills must be able to withstand this cutting heat and manage the contact arc length, which is an important consideration when selecting solid carbide end mills.

The 3 Elements You Should Take into Consideration when You Select End Mills 3

Coating and Cutting Edge Preparation of Solid Carbide End Mills

To enhance tool wear resistance and isolate the cutting zone, which generates heat, from the tool base (since heat accumulation in the base material can shorten tool life), solid carbide end mills are typically coated. Additionally, because the cutting edges of solid carbide end bit mills are quite sharp, appropriate adhesion between the tool base and the coating is also crucial (see Figure 3). This is especially important for smaller diameter solid carbide end mills, where the sharpness of the cutting edges is a key factor in the tool’s machining performance.

The 3 Elements You Should Take into Consideration when You Select End Mills 4

The Ideal Cutting Edge for Solid Carbide End Mills

The ideal cutting edge of a solid carbide end mill should have as high a hardness as possible while minimizing the risk of chipping. This goal can be partially achieved through proper cutting edge preparation. Generally, different solid carbide end mills may employ various cutting edge preparation methods, edge geometries, and sharpness levels depending on the required machining quality and tool life.

 

The cutting edge is the intersection line between the tool’s rake face and flank face. By grinding these faces, a sharp cutting edge can be obtained. However, if a PVD coating is deposited directly on a sharp cutting edge, it can create high internal stresses within the coating. These high internal stresses can cause the coating to crack and peel off during cutting, thereby shortening the tool’s life. The quality and effectiveness of the coating depend on its ability to withstand and/or reduce the wear rate during cutting. To ensure that the coating adheres more firmly to the cutting edge and to prevent edge damage, it is necessary to perform edge reinforcement (or blunting) treatment (see Figure 4). In other words, to ensure machining stability and achieve coating functionality, a certain degree of edge sharpness must be sacrificed, which in turn extends tool life.

The 3 Elements You Should Take into Consideration when You Select End Mills 5

It can even be said that the importance of cutting edge preparation for solid carbide end bit mills outweighs that of base material type and coating technology. Logically, this has a significant impact on the regrinding of solid carbide end mills. After regrinding, if the cutting edge is not re-blunted to restore its initial condition, the full potential of the tool repair cannot be realized. Therefore, considering the high initial cost of solid carbide end mills, it is crucial for the original tool manufacturer or its qualified service centers to handle tool regrinding services.

The 3 Elements You Should Take into Consideration when You Select End Mills 6

Machining Strategies for Solid Carbide End Mills

Solid carbide end mills can be categorized into several major types based on their size and geometry, and further subdivided into many specialized subcategories according to different machining ranges. In various tool application areas, design features such as flute geometry, cutting edge angles, rake and relief angles, and helix angles play crucial roles in differentiating among the types of solid carbide end bit mills. This classification guides the selection of both end mills and machining strategies.

So, which machining strategy is the best choice? This depends on the overall machining goals: is your primary aim to maximize productivity and part output, or to minimize tool costs and simplify tool types? Additionally, it also depends on the workpiece and various related factors: is the tool used for slotting, side milling, or a combination of both?

A final consideration is constraints, such as: what is the potential machining capability of the machine tool? How rigid is the workpiece clamping? These factors might become limiting constraints, preventing the use of more advanced machining strategies or more efficient specialized solid carbide end mills.

The correct choice of solid carbide end bit mill depends on multiple factors, with the most important being the adoption of the correct machining strategy. In practice, many constraints cannot be changed: the machining machine, CAM system, and the material, size, tolerance, and shape of the workpiece are fixed constants. However, within the existing machining system framework, machining results can still be influenced by formulating the right machining strategy and using various methods, and by optimizing cutting conditions through adjustments to feed rate, cutting speed, and cutting depth according to the overall machining goals.

Based on the selected focus and technical strategy, appropriate solid carbide end mills can be chosen. There are two obvious ways to select tools:

  1. Performance-Based Selection:Choose specialized end mills with specific applications (such as side milling, slotting, or 3D profiling) to achieve optimal performance.
  2. Versatility-Based Selection:Choose general-purpose end bit mills with a wider range of applications but fewer types.

Regardless of the selection method, users need to further narrow down the options within the available varieties and specifications of solid carbide end mills.

The 3 Elements You Should Take into Consideration when You Select End Mills 7

 

??????

The material, size, tolerance, and shape of the machined parts are given constants. However, within the existing machining system framework, machining results can still be influenced by formulating the correct machining strategy and employing various methods. Additionally, cutting conditions can be optimized by adjusting feed rate, cutting speed, and cutting depth according to the overall machining goals.

Based on the chosen focus and technical strategy, appropriate solid carbide end mills can be selected. There are two clear approaches to tool selection:

  1. Performance-Based Selection:Choose specialized end mills designed for specific applications (such as side milling, slotting, or 3D profiling) to achieve the best performance.
  2. Versatility-Based Selection:Choose general-purpose end mills that, while fewer in types, offer a wider range of applications.

Regardless of the selection method, users need to further narrow down the choices within the available varieties and specifications of solid carbide end mills.

??????? 17, 2024

Carbide is an incredible material

???????????? ??

???? ???? ??? ???????? ???? ???? ?????. ?????? ?????? ??????? ??? *

粗大长内射女人视频| 男人天堂av在线免费看| 中文字幕 av一区二区| 国产午夜久久精品一区四虎| 九九在线视频热线视频精选| 三级片手机在线视频| 午夜国产精品午夜福利网| 鸡巴抽插逼逼视频| 三级片成人京东热五月天| 亚洲国产精品一区亚洲国产| 好舒服好大好粗视频| 淫荡扣逼骚逼视频| 中文字幕av一区二区三区蜜桃| 大鸡巴操屁眼无码| 久久99热精品在线观看| 一区二区三区国产l精品欧美| 久久精品国产自清天天线| 性一交一乱一乱一区二区| 国产午夜高清无码一级片| 精品无码一区二区三区无码| 少妇毛片一区二区三区免费视频| 强奸啪啪啪好大欧美| 日本精品久久不卡一区二区| 亚洲精品影片一区二区三区| 美女肏肏逼应用下载| 亚洲一区二区女同性恋免费看| 伊人久久亚洲婷婷综合久久| 久久精品国产自清天天线| 男人扒开女人腿狂躁免费| 春宵福利导航91| 农村胖肥胖女人操逼视频| 亚洲乱码专区一区二区三区四区| 99热这里只有精品97| 阴茎大头插少妇蜜穴视频| 99爱这里只有精品| 国产精品操大屁股老淑女| 大男人在线无码直播| 久久噜噜噜久久熟女精品| 美国女人抠插bbb| 亚洲国产一区二区不卡在线资源| 欧美十八一区二区三区|