欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

general boring bar image

?????? ??? ?? ??? ?????????? ??? ????? ???? ???? ??, ?????? ??? ?? ?????? ?? ??? ???? ?? ?? ?????? ????? ?? ????? ????? ?? ?????? ?? ?? ???? ?? ?? ????????? ??? ?? ????? ??? ?? ??? ?? ??? ????? ?????? ??? ????? ???? ???? ????? ??? ???? ?? ?? ????? ????? ???? ???

If you happen to be familiar with long overhang machining, probably you also have been haunted by an underlying problem that all single-point cutting tools with long shank can’t skirt around, which is vibration, or so-called chatter.

Main reasons that cause machining chatter

  1. Length of it exceeds 125mm,
  2. Its rotating rate per min is too high,
  3. Loose clamping of tool or workpiece.
working status

Why is reducing chatter so vital to drilling process?  

At present, in internal hole processing, ratio of length-to-diameter of a boring bar extension is generally less than 4:1. Once the ratio is more than that, the tool body will vibrate violently, resulting in poor tolerance of machined hole that can not meet requirements of product surface roughness.

Are there some other solutions to fix the problem?

Yes, basically veterans try the following 2 tips to alleviate chatter,

  1. Choose inserts with a smaller cutting edge angle. It will improve the whole tool’s performance of heat dissipation as well,
  2. Either lower feed rate or rotating rate of the spindle.

Nonetheless, you will find it still hardly improve the accuracy of machining due to limited cutting parameters. It inevitably moderates the metal removal rate per unit time.

That’ s why we suggest you solve this problem from the ground up. For clients from the industry of tool fabrication, we recommend carbide boring tool holders (tool bit excluded) available in our stock. Boring bits assembled on it efficiently are allow to enhance its capability against disastrous processing result caused by vibration and cutting heat. Tool bit can be tightened by being screwed with threads carved in its shank’s internal hole.

How does it profit you if your boring bars are made of carbide?

It’s easily for low carbon steel to reach required rigidity of external turning tool and end face turning tool cause their overhang part out of spindle is generally not be too long. Whereas all boring bars have to be designed as slim as possible for readily protruding into machined hole in the long-reach application. They are way more vulnerable versus other types of lathe bars bearing chatter. Manufacturers have to develop suitable materials on that purpose, e.g. carbon steel, tungsten alloy, and carbide.

ground boring bar

Under what circumstance should carbide boring bar be applied?

As we mentioned above, the length-to-depth ratio is a critical factor to affect what material to be used in the fabrication of a lathe boring bar. Steel carbon allows a 4:1 ratio, and tungsten alloy allows ratio of more than 4:1. Carbide is one of those optimal solutions for those boring bars in ratio up to 8:1 thanks to carbide’s high rigidity.

Why choose Mcct?

Please save your time sourcing manufacturer with design ability and full production line.

why do we choose Mcct

As an enterprise that has been in the business of carbide parts and produced them for 11 years. We are able to assure you that all parts are made in our wholly-owned factory operated under the instruction of ISO 9001. Sufficient expertise is obtained by us to tailor a series of carbide products for meeting requirements from our clients.

Product description

There are 3 types of boring bars you could find in our store. They are ST(standard), CL, and CN.

product description

As shown in the following chart, we’ve made a list of common ST type boring bars. You could check out if there happens to be certain one of size that you need. Otherwise, please just contact our service personnel for all detailed info.

ST type
?? (????)φ??φD1M
10084.5M4
 80-150 10 5.5 M5
 100-200 12 6.5 M6
 100-200 15 8.5 M8
 100-200 15.6 8.5 M8
 100-250 16 8.5 M8
 150-250 19 10.5 M10
 100-250 20 10.5 M10
 150-300 24 12.5 M12
 150-300 25 12.7 M12
 200-400 32 17M16
CN type
CL type

Instruction of use

Please pay attention to the limitations of the depth-to-length ratio. Boring bar will get broken If the overhang part of shank scales out the limitation.  

Reserve enough space for flushing the swarf, which means you should choose a boring bar with a suitable size according to the diameter and depth of the machined hole

If encounter problem about our products that you can’t figure out, please contact us directly or the agency where you purchase the item.

What’s more

We will launch solid boring toolbars and V-shaped welded boring bars in the near feature. Please subscribe to our blog you will be updated with more product details and tips of operating. We genuinely hope our insistence on the highest of standards of products we provide is able to convey the enticing values the tool manufacturer has to offer and impress you someday.

SOLID TYPE boring bar
chevron welded boring bar

???????????? ??

???? ???? ??? ???????? ???? ???? ?????. ?????? ?????? ??????? ??? *

国产午夜爽爽爽男女免费动漫AV| 亚洲乱熟女一区二区三区| 大屁股真人日逼视频| 极品美女销魂一区二区三区| 娇嫩的被两根粗大的np| 国产操小骚逼视频| 夜夜嗨av少妇一二三区| 国产精品久久久69粉嫩| 大黑屌日本另类肛交| 国产黄片在线免费看| 又爽又粗又大又长的爆草| 曰木高清免费一本| 日韩午夜经典福利| 从后面进入嗯啊视频| 国产女主播喷出白浆视频| 欧美日韩亚洲人人夜夜澡| 操大屌粉的小穴视频| 插女人下面高潮视频| 2021国产精品自在自线| 人妻波多野结衣爽到喷水| 黄色视频网在线观看| 欧美精品日韩精品中文字幕| 男人摸女人下面视频| 国产精品免费第一区二区| 99国产精品一区二区| 欧美日韩亚洲人人夜夜澡| 欧美大鸡巴操穴日韩| 国产乱子伦视频一区二区三区| 国产大码丝袜老熟女av| 极品一区二区三区av| 亚洲av无一区二区三区综合| 国产高清在线观看一区二区三区| 亚洲精品国产综合一线久久| 国产精品午夜小视频观看| 日本二区在线观看| 日韩欧美中文字幕国产精品| 亚洲国际精品一区二区| 黄色软件大屌怒戳粉嫩小穴| 高颜值美女视频在线观看| 又色又爽又黄的吃奶Av| 国产欧美一二区不卡视频|