欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

The end mill cutter, which is the most commonly used milling cutter on CNC machine tools, has cutting edges on both the cylindrical surface and the end face. It can perform simultaneous or separate cutting operations. It is mainly used for flat milling, groove milling, step surface milling, and contour milling.

Flute number

The number of cutting edges on an end mill cutter mainly includes 2-flute, 3-flute, 4-flute, 6-flute, and other types. The number of flutes is related to the size of the chip pocket area for collecting the chips. The chip pocket is a groove for temporarily storing the chips. If we consider the rotating cylindrical profile of the end mill cutter as 100%, the chip pocket areas for various numbers of flutes are shown in the diagram below.

molino de extremo

Proportion of the cross-sectional area of the chip holding tank

As the number of flutes increases, the chip pocket area gradually decreases while the cutting edge area increases, leading to improved rigidity. The characteristics and applications of an milling cutter depend on the number of flutes. (Refer to the table below)

What are the 7 Important Parameters of an End Mill Cutter? 2

Characteristics and applications of end mills with various blade numbers

Longitud del filo

When installing an mill cutter on a tool holder for machining, deflection as shown in the diagram can occur due to cutting resistance. The deflection is directly proportional to the cutting resistance and, more specifically, proportional to the cube of the length (overhang) from the end mill cutter to the tool holder.

What are the 7 Important Parameters of an End Mill Cutter? 3

Deflection of end milling cutter

To improve the perpendicularity of the machined surface, which refers to the surface deformation of the machined surface, it is necessary to reduce deflection. This can be achieved by minimizing the overhang of the mill cutter, which means using an end mill cutter that is slightly longer than the length of the machining portion.

Therefore, the cutting edge length of a mill cutter is generally categorized as follows:

a.Extra-short

b. Short

c. Medium

d. Medium-long

e. Long

f. Extra-long

 

helix angle

The spiral direction of an end mill cutter is generally right-hand spiral. When using it, the rotation is in a clockwise direction when viewed from the installation side (the side of the tool holder) – this is referred to as right-hand rotation. Cutting tools that rotate in a right-hand direction are called right-hand tools, while those that rotate counterclockwise (left-hand rotation) are called left-hand tools. The mill cutters discussed in this chapter are right-hand tools with a right-hand spiral.

What are the 7 Important Parameters of an End Mill Cutter? 4

 

Left Blade Left Spiral Left 30 ° and Right Blade Right Spiral Left 30 °

The helix angle of a mill cutter is generally 30°. A smaller helix angle results in poorer cutting sharpness, while a larger helix angle provides better cutting sharpness. However, increasing the helix angle can also increase the axial force in the direction of tool retreat, which may lead to tool dislocation. The characteristics and applications of end mill cutters with different helix angles are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 5

Table of Characteristics and Applications of End Mills with Different Helical Angles

Peripheral blade

The shapes, types, and characteristics of peripheral edge end mill cutters are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 6

The shape of the outer edge

What are the 7 Important Parameters of an End Mill Cutter? 7

Right angle and spiral flute

filo final

The shapes, types, and characteristics of the bottom edge of a mill cutter are shown in the table below. The center cutting edges include shapes with long and short cutting edges (shown as A and C in the table) as well as twisted core shapes (shown as B in the table). They can all be used for axial feed cutting.

What are the 7 Important Parameters of an End Mill Cutter? 8

The purpose of each shape of end milling cutter

Hilt? of end mill

The shapes, types, and characteristics of the shank of an end mill cutter are shown in the table below:

What are the 7 Important Parameters of an End Mill Cutter? 9

Tool handle shape

The shapes, types, and characteristics of the neck of an end mill cutter are shown in the table below:

?Cuáles son los 7 parámetros importantes de una fresa de extremo? 10

The shape of the handle and neck of the knife

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

波多野结衣福利视频| 欧美日韩国产这里只有精品| 国产精品无码毛片久久久| 日本入室强伦姧人妻中文| 亚洲日韩不卡一区二区三区| 国产日韩一区二区三区在线播放| 毛片日产av一区二区三区四区| 美女逼男逼小穴小骚下载| 欧美老熟妇又粗又大| 亚洲一区二区三区日本在线| 亚洲国产一区二区不卡在线资源| 乱伦美女小骚货视频| 欧美男女舔逼舔鸡巴视频| 国内揄拍国内精品| 粗大长内射女人视频| 亚洲国产精品伦理在线看| 亚洲欧美一区二区爽爽爽| 五月天婷婷一区二区三区久久| 性一乱一交一免费看视频| 国内不卡的中文字幕一区| 日韩精品一区二区天堂| 国内不卡的中文字幕一区| 国产一区二区三区 韩国女主播| 久久精品一区二区三区免费看| 天天舔操操操av| 美女人的逼免费观看| 青春草在线视频观看| 国产精品白浆一区二区三区| 啊啊啊好疼视频进来| 国产天美传媒剧免费观看| 中文字幕国产精品一区二区三区| 日韩人妻精品一区二区三区99| 日韩视频无码日韩视频又2020| 骚狐狸免费在线观看视频| 亚洲精品一区二区精华液| 亚洲一区二区女同性恋免费看| 中文字幕乱码一区二区三区麻豆| 久久亚洲精品中文字幕一| 精品的极品美女一区二区三区| 99爱国产精品免费视频| 91大神精品动漫|