欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

When processing holes using a drill bit, cutting resistance is required. This cutting resistance can be divided into torque and axial force. The definition of torque is the force acting in the direction of rotation of the drill bit; the definition of axial force is the force acting in the feed direction of the drill bit. Torque and axial force vary with the material, hardness, and cutting conditions of the workpiece. Whether in milling or turning processes, the cutting edge is subjected to three forces: main cutting force, back cutting force, and feed cutting force. However, when drilling, the drill bit is subjected to only two forces. Torque and axial force vary with the drill bit diameter and feed speed but are not affected by the cutting speed (RPM). The above content explains the processing characteristics of holes.

drill bit

Various components of a drill bit in a CNC machining center.

Overall length

The overall length refers to the measurement along the axis in the horizontal direction, from the peripheral angle of the front cutting edge to the rear end of the tool handle.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 2

Tool body

The tool body is the portion extending from the front end of the tool handle to the peripheral angle of the front cutting edge.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 3

Inverted cone

To prevent friction between the outer periphery of the drill bit and the inner surface of the hole during drilling, the outer diameter near the tool handle is made thinner. This design is referred to as a reverse taper. The larger the reverse taper, the lower the cutting resistance, but it also results in a reduction of the tool diameter, thereby decreasing the number of times it can be re-sharpened.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 4

Hold bar

This is the clamping section for securing the drill bit.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 5

Groove

The groove is located in the recessed area between adjacent cutting edges and the top edge, serving the purpose of chip evacuation. The drill bit groove consists of two spiral grooves, and under a certain rake angle, the groove is specified to have a certain shape, allowing the cutting edge to form a straight line.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 6

Point angle

The point angle is the angle formed by the projection of the cutting edge on a plane parallel to the axis of the drill bit. High-speed steel drill bits typically use a point angle of 118 degrees, while the point angle for carbide drill bits is often in the range of 130 to 140 degrees.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 7

Drill core

The drill core is a unique design located at the center of the drill bit axis, ensuring the rigidity of the drill bit. There are two types of drill cores: parallel and tapered. The thicker the drill core, the greater the torsional rigidity and bending strength. Drill core thickness refers to the thickness of the tip portion of the drill core. Lateral edge honing refers to intentionally thinning a specific portion of the drill core at the tip to reduce cutting resistance at the center of the drill bit. Lateral edge honing reduces the cutting resistance concentrated on the lateral edge, optimizing cutting sharpness and chip evacuation, and plays a role in extending tool life and improving hole accuracy and stability.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 8

Lead

The lead is the distance the cutting edge advances along the axis when the cutting edge revolves around the axis for one complete revolution.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 9

Relief angle

The relief angle is the angle formed between the perpendicular cross-section of the axis on the outer peripheral angle and the back cutting edge. The larger the relief angle, the lower the cutting edge strength at the tool tip.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 10

Coolant hole

Coolant holes can directly supply coolant to the cutting point, resulting in high chip evacuation efficiency, eliminating the need for adjustments to nozzles as required by externally supplied oil methods used in conventional drill bits. Compared to standard externally cooled drill bits, drills equipped with coolant holes demonstrate further improvements in cutting speed and feed rate, effectively enhancing machining efficiency.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 11

Cutting band

The cutting band is the cylindrical portion of the unprocessed second back surface on the blade, serving to enhance dimensional stability. The cutting band width refers to the width of the cutting band on the perpendicular cross-section of the axis.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 12

Cross blade

The cross-cutting edge is the cutting edge in the central portion of the drill bit. The shorter the length of the cross-cutting edge, the better the cutting performance.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 13

Cutting edge

carbide?drill bits require cutting edge treatments based on different purposes. The greater the width or angle of edge grinding, the higher the cutting edge strength, but it also leads to increased cutting resistance.

Do You Know Various Parts of the Drill Bit in CNC Machining Center? 14

Understanding the structure and functions of drill bits for CNC machining centers can help users better utilize these cutting tools and ensure optimal machining results. CNC machining centers offer a diverse range of tool types. Once installed, they allow for efficient processing of workpieces through the use of multiple tools from the tool magazine after a single setup.

Deja una respuesta

Tu dirección de correo electrónico no será publicada. Los campos obligatorios están marcados con *

成年人的一级黄色带| 一区二区国产精品免费视频| 熟妇人妻无乱码中文字幕| 操老女人大逼视频| 欧美亚洲综合一区二区三区| 淫荡淫水逼操烂视频| 国产午夜久久精品一区四虎| 日本入室强伦姧人妻中文| 91性潮久久久久久久久| 淫荡淫水逼操烂视频| 狠狠干无码日韩AV| 黑人大鸡把操逼视频| A级毛片高清视频| 久久久久久久久中文字幕| 在线观看国产日韩欧美一区二区| a一级毛片免费高清在线| 国产欧美日本韩国一区二区| 男男大鸡巴操小屁眼视频| 中文字幕av一区二区三区哈| 99视频在线看免费视频| 欧美一区二区三区男人的天堂| 啊服慢一点插入逼逼| 国产精品三二一免费| 丁香社区五月在线视频久| 美女插逼插出淫水来| 日韩美女黄大片在线观看| 骚狐狸免费在线观看视频| 成人黄色精品久久app| 亚洲综合欧美日韩| 校花内射国产麻豆欧美一区| 日本黑鸡吧黄色录像| 女人扒开腿让我舔十八禁| 插到底啊啊啊视频| 亚洲福利左线观看| 国产精品三级一区二区| 好想插进去捅一捅| 日本福利一区二区视频| 亚洲国产精品伦理在线看| 新视觉亚洲三区二区一区理伦| 国产激情内射免费精品| 精品国产自在久国产应用|