欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

carbide?combines the excellent properties of hard phase and binding phase, thus possessing a series of advantages. It has high hardness (80-94 HRA) and wear resistance, especially maintaining high hardness and strength at higher temperatures. At 600°C, its hardness exceeds the room temperature hardness of high-speed steel, and at 1,000°C, its hardness surpasses the room temperature hardness of carbon steel, while the strength can still be maintained around 300 MPa. It has a high elastic modulus, typically ranging from 400 to 700 MPa. carbide?has a high compressive strength, capable of withstanding heavy loads and maintaining its shape. It also has a low coefficient of thermal expansion, generally 50% of that of steel. Moreover, it exhibits good chemical stability and superior oxidation and corrosion resistance compared to steel. carbide?has become an indispensable material for tooling and structural applications in almost all industrial sectors and emerging technological fields.

How does deep cryogenic treatment on carbide been carried? 2

What is heat treatment?

Heat treatment is an important method for improving the structural properties of materials. Deep cryogenic treatment, as an extension and advancement of traditional heat treatment processes, has been widely applied in the field of materials heat treatment since the mid-20th century. For conventional steel materials, deep cryogenic treatment can transform residual austenite, enhancing the hardness of the workpiece and stabilizing its dimensions. It can precipitate ultra-fine carbides, improving the wear resistance of the workpiece. It can refine the grain structure, enhancing the impact toughness of tooling and molds. It can also improve the corrosion resistance of martensitic stainless steel and enhance the polishing performance of the workpiece. With the further development and maturity of liquid nitrogen cooling technology and insulation techniques, deep cryogenic treatment of carbide has also attracted the attention of industrial enterprises both domestically and internationally.

Current Status of Deep Cryogenic Treatment Process

Deep cryogenic treatment typically involves cooling the workpiece using liquid nitrogen, which can bring the temperature below -190°C. The microstructure of the treated material undergoes changes in a low-temperature environment, resulting in improved properties. Deep cryogenic treatment was initially proposed by the Soviets in 1939, but it wasn’t until the 1960s that the United States industrialized the technology and started applying it primarily in the aerospace field. In the 1970s, its application expanded to the mechanical manufacturing sector.

Cryogenic treatment process methods

There are two different methods based on the cooling approach: liquid-based and gas-based methods. The liquid-based method involves immersing the material or workpiece directly into liquid nitrogen, rapidly cooling it to the temperature of liquid nitrogen, and then maintaining it at this temperature for a certain period before raising the temperature to a desired level. This method has difficulties in controlling the cooling and heating rates, and it is believed to potentially cause damage to the workpiece due to thermal shocks. The equipment used for liquid-based deep cryogenic treatment is relatively simple, such as liquid nitrogen tanks.

On the other hand, the gas-based method utilizes the latent heat of vaporization of liquid nitrogen (approximately 199.54 kJ/kg) and the heat absorption of low-temperature nitrogen gas to achieve cooling. This method can reach a deep cryogenic temperature of -190°C. It involves bringing the workpiece into contact with low-temperature nitrogen gas, which then circulates through convection heat transfer. The nitrogen gas is vaporized after being sprayed through a nozzle inside a deep cryogenic chamber, utilizing the latent heat of vaporization and heat absorption of low-temperature nitrogen gas to cool the workpiece. The cooling rate can be controlled by adjusting the input of liquid nitrogen, allowing for automatic and precise control of the deep cryogenic treatment temperature. This method imposes less thermal shock and reduces the likelihood of cracking. Currently, the gas-based method is widely accepted by researchers in the field and its cooling equipment mainly consists of temperature-controlled programmable deep cryogenic chambers.

Deep cryogenic treatment can significantly improve the service life, wear resistance, and dimensional stability of materials such as ferrous metals, non-ferrous metals, and metal alloys. It offers considerable economic benefits and market prospects.

How does deep cryogenic treatment on carbide been carried? 3

The development history of deep cryogenic technology

The application of deep cryogenic technology to carbide?was first reported in the 1980s and 1990s. In 1981, Japan’s “Mechanical Technology” and in 1992, the US’s “Modern Machine Shop” reported significant improvements in performance after deep cryogenic treatment of carbide. Since the 1970s, foreign research on deep cryogenic treatment has been highly productive, with countries such as the former Soviet Union, the United States, and Japan successfully utilizing deep cryogenic treatment to enhance the service life, wear resistance, and dimensional stability of tooling and workpieces. The practical application of deep cryogenic treatment by a US tooling company demonstrated that the service life of treated carbide?blades increased by 2 to 8 times, while the refurbishment cycle of carbide?wire drawing dies extended from a few weeks to several months.

In the 1990s, research on deep cryogenic technology for carbide?was initiated in China, achieving certain research results. However, overall, there has been relatively limited and fragmented research on deep cryogenic treatment for carbide. The conclusions obtained from existing research are also inconsistent, indicating the need for further in-depth exploration by researchers. Based on existing research data, it is evident that deep cryogenic treatment primarily improves the wear resistance and service life of carbide, with less noticeable effects on their physical properties.

Wie wurde die Tiefkryogenbehandlung von Hartmetall durchgeführt? 4

The strengthening mechanisms of deep cryogenic treatment

Phase transformation strengthening

carbide contain two crystal structures of cobalt (Co): face-centered cubic (α-phase) and hexagonal close-packed (ε-phase). The ε-phase has a smaller friction coefficient and better wear resistance compared to the α-phase. At temperatures above 417°C, the α-phase has lower free energy, so Co exists in the α-phase form. Below 417°C, the ε-phase has lower free energy, and the high-temperature stable α-phase transforms into the energetically favored ε-phase. However, due to the presence of WC particles and solute atoms in the α-phase, there are significant constraints on the phase transformation, making the transformation from α-phase to ε-phase more difficult. Deep cryogenic treatment increases the free energy difference between the α and ε phases, enhancing the phase transformation driving force and increasing the amount of ε-phase transformation. Deep cryogenic treatment causes some atoms dissolved in Co to precipitate as compounds due to decreased solubility, increasing the hard phase in the Co matrix, hindering dislocation movement, and providing strengthening through the second-phase particle effect.

Surface residual stress strengthening

Studies have shown that deep cryogenic treatment increases the residual compressive stress in the surface layer. Many researchers believe that the presence of a certain level of residual compressive stress in the surface layer significantly improves the service life of carbide. During the cooling process after sintering, the binder phase Co experiences tensile stress, while the WC particles experience compressive stress. Tensile stress can cause damage to the Co binder. Therefore, some researchers believe that the increase in surface compressive stress caused by deep cryogenic treatment can alleviate or partially offset the tensile stress generated during the cooling process after sintering in the binder phase, and even adjust it to compressive stress, reducing the formation of microcracks.

Andere Verst?rkungsmechanismen

It is believed that after deep cryogenic treatment, the formation of η-phase particles in the matrix, along with the WC particles, makes the matrix denser and more robust. The formation of η-phase also consumes the Co in the matrix. The decrease in Co content in the binder phase increases the overall thermal conductivity of the material. The growth of carbideparticle size and adjacency also enhances the thermal conductivity of the matrix. The increased thermal conductivity allows for faster heat dissipation at the cutting edge of the tooling, improving wear resistance and high-temperature hardness. Additionally, the contraction and densification of Co during deep cryogenic treatment strengthen the Co’s grip on the WC particles. Physicists believe that deep cryogenic treatment alters the atomic and molecular structure of the metal, leading to improved properties.

Overall, deep cryogenic treatment enhances the wear resistance and service life of carbide?primarily by the phase transformation strengthening and surface residual stress strengthening mechanisms, while the impact on physical properties is less significant.

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

女人操女人大逼大片| 日韩 欧美 一区 二区三区| 国产精品三二一免费| 男人天堂av在线免费看| 中国女人日逼免费片| 精品v欧洲高清欧美| 91精品国产综合久久久蜜| 大胸瑟瑟黑丝午夜| 日本免费无码一区二区到五区| 91精品国产综合久久久蜜| 国产91视频观看| 久久久精品日韩一区二区三区| 国产亚洲欧美中文日韩| 午夜性福福利视频一区二区三区| 少妇精品久久久一区二区免费| 欧洲老妇人操大逼| 深插巴西美女的逼| 瓯美在线免费视频笫一区第二区| 欧美精品国产一区二区在线观看| 国产欧美日韩一区二区在线观看| 男人草女人的视频免费看| 中文字幕欧美中日韩精品| 差鸡巴没码在线观看| 插女人下面高潮视频| 一区二区三区av精品| 老司机免费福利午夜入口| 日本a国产精品久久久久| 看看美日韩操逼吧| 黄色三极片在线观看| 精品久久久久亚洲中文字幕| 天堂久久久久久久久久久| 精品无码国产一区二区三区A| 非洲人粗大长硬配种视频| 成年女人永久看片视频 | 国产精品三级一区二区| 色熟妇人妻久久中文字幕| 91偷自产一区二区三区蜜臀| 干女人逼逼的大几把| 黄色高清带三级1集2集| 瓯美在线免费视频笫一区第二区| 免费看澡美女逼视频看看|