欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Powder metallurgy is mainly applicable to the auto industry, equipment manufacturing industry, metal industry, aerospace, military industry, instrumentation, hardware tools, electronic appliances and other fields.

8 Pulvermetallurgische Herstellungsverfahren in allgemeiner Anwendung 2

Metal powders commonly used in powder metallurgy include iron, copper, aluminum and their alloys. During the manufacturing process, the content of impurities and gases shall not exceed 1% ~ 2%, and the particle size of the powder shall not exceed 5 μ m~10 μ m. Otherwise, the quality of the products will be affected. The apparent geometry of the powder particles. The common ones are spherical, columnar, needle like, plate-like and sheet-like, which can be determined by observation under a microscope.

1. Arc melting in

The arc of direct heating arc melting is generated between the electrode rod and the melted charge, and the charge is directly heated and melted by the arc

8 übliche pulvermetallurgische Herstellungsverfahren 3

2. Ultra high pressure water atomization pulverization

The working principle of the ultra-high pressure water atomization pulverizing device is to melt metal or metal alloy under atmospheric conditions. Under the condition of gas protection, the metal liquid will be atomized and broken into a large number of fine metal droplets by the ultra-high pressure water flow through the nozzle in the process of flowing down through the insulating tundish and the guide pipe, In the process of flight, fine droplets form sub spherical or irregular particles under the combined action of surface tension and rapid cooling of water, so as to achieve the purpose of powder production.

8 Powder metallurgy manufacturing processes in common use 4

3. Anneal

The pre annealing of the powder can reduce the oxide, reduce the content of carbon and other impurities, and improve the purity of the powder; At the same time, the work hardening of the powder can be eliminated and the crystal structure of the powder can be stabilized. The annealing temperature is usually 0.5 to 0.6k of the melting point of the metal, depending on the type of the metal powder. Generally, the annealing temperature of electrolytic copper powder is about 300 ℃, and that of electrolytic iron powder or electrolytic nickel powder is about 700 ℃, which cannot exceed 900 ℃. Annealing is generally conducted in a reducing atmosphere, and sometimes in a vacuum or inert atmosphere.

8 übliche pulvermetallurgische Herstellungsverfahren 5

4. Grading

The process of dividing powder into several grades according to particle size. Grading makes it easy to control the particle size and particle size distribution of the powder during batching, so as to meet the requirements of the forming process. Standard screen is commonly used for grading.8 übliche pulvermetallurgische Herstellungsverfahren 6

5.Mixture

Refers to the process of homogenizing two or more powders with different components. The powder or mixture is mechanically mixed uniformly without chemical reaction. Plasticizers (gasoline, rubber solution, paraffin, etc.) used to improve the strength of compacts or prevent segregation of powder components. Hard zinc acid, molybdenum disulfide, etc., lubricants used to reduce the friction between particles and between the compact and the mold wall, and lubricants used to reduce the friction between particles and between the compact and the mold wall

8 übliche pulvermetallurgische Herstellungsverfahren 7

6. Shaping

It is the process of transforming powder into product. The common forming methods are die pressing, rolling, extrusion, isostatic pressing, loose packing sintering, slurry casting, etc.

8 Pulvermetallurgische Herstellungsverfahren in allgemeiner Anwendung 8

7. Sintering

1、 The sintering methods are different for different products and different properties. It is classified according to the composition of raw materials. Sintering can be divided into unit system sintering, multi-system solid-phase sintering and multi-phase sintering

a. Element system liquid phase sintering.

Unit system sintering is generally different from pure metals (such as refractory metals and pure iron soft magnetic materials)

b. Multicomponent solid-phase sintering is made of

Solid phase sintering is performed in a sintering system composed of two or more components in which the melting point temperature of the low melting component is lower than or equal to the melting point temperature. Such as Cu Ni, Fe Ni, Cu Au, W-Mo, Ag Au, Fe Cu, W-Ni, Fe-C, Cu-C, Cu-W, Ag-W, etc

2It is classified according to different feeding methods. It can be divided into continuous sintering and batch sintering

8 Pulvermetallurgische Herstellungsverfahren in allgemeiner Anwendung 9

8. Post treatment before powder metallurgy

It refers to the further treatment after sintering of the compact, and determines whether post-treatment is required according to the specific requirements of the product. The commonly used post-treatment methods include re pressing, impregnation, heat treatment, surface treatment and cutting.

a Re pressing

Pressure applied treatment to improve the physical and mechanical properties of sintered body, including finishing and shaping. Finishing is the re pressing to achieve the required size. The sintering body is pressed by the finishing die to improve the accuracy. Shaping is the re pressing to achieve a specific surface shape. The product is pressed by the shaping die to correct the deformation and reduce the surface roughness value. Re pressing is applicable to products with high requirements and good plasticity, such as iron-based and copper based products.GIF

8 Pulvermetallurgische Herstellungsverfahren in allgemeiner Anwendung 10

b Impregnation

The method of filling the pores of sintered body with non-metallic materials (such as oil, paraffin and resin). The common impregnation methods are oil impregnation, plastic impregnation, molten metal impregnation, etc. Oil immersion is to immerse lubricating oil in the sintering body to improve its self-lubricating performance and prevent rust. It is commonly used in iron and copper based oil-bearing. The impregnated plastic is made of polytetrafluoroethylene dispersion. After curing, it can realize oil-free lubrication. It is commonly used for metal plastic friction reducing parts. Immersion in molten metal can improve the strength and wear resistance. Copper or lead immersion is often used for iron-based materials.

c Heat treatment

The method of heating the sintered body to a certain temperature and then controlling the cooling method to improve the product performance. The commonly used heat treatment methods include quenching, chemical heat treatment, thermal mechanical treatment, etc. the process method is generally similar to that of dense materials. For iron-based parts that are not impacted but require wear resistance, integral quenching can be adopted. Since the existence of pores can reduce the internal stress, generally tempering is not required. And the iron-based parts requiring external hardness and internal toughness can be quenched or carburized. Hot forging is a common method to obtain compact parts. Hot forged products have fine grains and high strength and toughness.

d Surface treatment

The commonly used surface treatment methods include steam treatment, electroplating, zinc dipping, etc. The steam treatment is performed when the workpiece is in the range of 500 ~

The surface process of heating in hot steam at 560 ℃ and keeping it for a certain time to form a dense oxide film on its surface and pores. It is used for iron-based products requiring rust prevention, wear resistance or high-pressure penetration. Electroplating applies the electrochemical principle to deposit a solid coating on the surface of products, and the process method is the same as that of dense materials. Electroplating is used for products requiring rust prevention, wear resistance and decoration. In addition, the shape of the sintered body can be further changed or the accuracy can be improved by forging, welding, cutting, special processing and other methods to meet the final requirements of the parts. Special machining methods such as EDM, electron beam machining and laser machining, as well as surface engineering technologies such as ion nitriding, ion implantation, vapor deposition and thermal spraying, have been used for post-treatment of powder metallurgy products, further improving production

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

美国大鸡巴操逼视频| 操老骚逼三级黄视频| 猛哥操女人B视频| 爱爱视频小抽插动漫| 制服丝袜国产在线第一页| 五月天国产成人av在线| 国产精品熟女一区二区三区久久夜| 日韩乱码一区二区三区中文字幕| 五月天国产成人av在线| 野外日逼视频免费看| 日韩在线中文字幕在线视频| 日韩毛片一区视频免费在线观看| 伊人久久亚洲婷婷综合久久| 粉嫩小穴被大鸡巴操视频在线观看| 久久久五月性色视频| 日韩欧美综合一二三区| 日韩在线视频不卡一区二区三区| 骚狐狸免费在线观看视频| 亚洲二亚洲欧美一区vr| 黑人大屌大战中国女| 亚洲国产国产综合一区首页| 丁香婷婷色婷婷粗大| 午夜理论理论亚洲激情| 国产亚洲欧美中文日韩| 高清无码精品一区二区三区| 骚狐狸免费在线观看视频| 中文字幕在线精品的视频| 男插女逼啪啪啪软件| 精品国产Av无码久久久一区二区| 一区二区国产欧美日韩无| 美女被大屌操大骚逼| 中日美女毛5片一区二区三区| 中文字幕在线观看第二页| 亚洲AV无码一区二区三区天堂古| 久久久国产精品亚洲无码| 使劲操大骚逼av| 大鸡吧老外操中国逼| 淫荡扣逼骚逼视频| 骚穴手机在线视频| 韩国年轻的母亲在线观看| 亚洲波多野结衣日韩在线|