欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

Causes of Milling Cutter Tragen

Milling cutter wear is primarily attributed to two main categories, which are generally complex:

Mechanical Wear

Mechanical wear is induced by intense friction between the cutting chips and the front cutting surface of the tool, as well as the elastic deformation between the tool’s front and rear cutting surfaces and the workpiece surface. This form of wear, termed mechanical wear, becomes the main cause of tool wear when cutting temperatures are not excessively high.

Thermal Wear

During cutting, the intense plastic deformation and friction of the metal generate cutting heat, leading to a reduction in the hardness of the tool edge and a consequent loss of cutting performance, known as thermal wear.

In addition to these two types of wear, several other forms are noteworthy:

  1. At high temperatures and pressures, adhesion occurs between the tool and workpiece materials, causing adhesive wear, where a portion of the tool material is carried away by the chips.
  2. At even higher temperatures, certain elements (such as tungsten, cobalt, titanium, etc.) in the tool material diffuse into the workpiece material, altering the chemical composition of the tool’s cutting surface, resulting in diffusion wear.
  3. High-speed steel tools, under elevated cutting temperatures, experience changes in the metallographic structure of the tool’s surface, leading to decreased hardness and wear resistance, known as phase transformation wear.
  4. Since each tooth of a milling cutter engages in periodic interrupted cutting, temperature fluctuations during each cutting cycle are substantial, causing thermal shock. Cemented carbide tools, subjected to thermal shock, may develop internal stresses leading to cracking, resulting in thermal crack wear.
  5. Due to intermittent cutting, milling cutter temperatures are generally lower compared to turning, making mechanical friction the primary cause of tool wear.3 Important Pieces of Knowledge about Milling Cutter Wear 2

Methods for Assessing Tool Wear

Auditory Inspection

Evaluate tool wear during machining by listening for abnormal sounds. Sudden changes in tool sound during processing may indicate wear, requiring experienced judgment.

Visual Inspection

Observe the machining process. If irregular and intermittent sparks occur, it suggests tool wear. Replace the tool promptly based on the average tool life.

Chip Color Examination

Changes in chip color indicate altered machining temperatures, possibly due to tool wear.

Chip Shape Inspection

Irregularities such as sawtooth patterns, abnormal curls, or finer chips than usual suggest tool wear.

Workpiece Surface Analysis

Bright marks on the workpiece surface, with minimal changes in roughness and dimensions, indicate tool wear.

Auditory Monitoring of Machine Vibrations

Increased vibration during machining and unusual sounds may indicate tool wear. Care must be taken to avoid tool breakage.

Machine Load Observation

Significant changes in machine load indicate potential tool wear.

Cutting Edge Assessment

Severe burrs, reduced surface roughness, and dimensional changes in the workpiece are clear indicators of tool wear.

In summary, the combined observation of sight, sound, and touch allows for effective assessment of tool wear.

3 Important Pieces of Knowledge about Milling Cutter Wear 3

Methods to Avoid Tool Wear on Milling Cutters

Edge Wear of Milling cutter

Improvement measures include increasing the feed rate, lowering cutting speeds, using more wear-resistant blade materials, and employing coated blades.

Fracture

Measures to address fracture include using materials with better toughness, utilizing reinforced blade edges, ensuring rigidity in the process system, and adjusting the main relief angle.

Thermal Deformation

Strategies to combat thermal deformation include lowering cutting speeds, reducing feed rates, minimizing cutting depths, and using materials with better thermal hardness.

Damage at Cutting Depths

To address damage at cutting depths, adjusting the main relief angle, reinforcing the blade edge, and changing blade materials are effective methods.

Thermal Cracks

Effective strategies involve proper coolant use, reducing cutting speeds, minimizing feed rates, and employing coated blades.

Chip Accumulation

To prevent chip accumulation, increase cutting speeds, raise feed rates, use coated or metal-ceramic blades, and apply coolants to maintain a sharper cutting edge.

Tooth Wear

Mitigation measures include lowering cutting speeds, reducing feed rates, using coated blades or metal-ceramic blades, and employing coolants.

Fracture

To avoid fracture, use materials with better toughness or a groove design, reduce feed rates, minimize cutting depths, and assess the rigidity of the process system.

In conclusion, a comparative analysis of two milling cutters on the same workpiece revealed that selecting appropriate milling cutters and promptly identifying wear not only enhances machining efficiency but also reduces processing costs.

3 Wichtige Erkenntnisse zum Fr?serverschlei? 4

Schreibe einen Kommentar

Deine E-Mail-Adresse wird nicht ver?ffentlicht. Erforderliche Felder sind mit * markiert.

欧美丰满大屁股女人的逼被操视频| 亚洲综合极品香蕉久久网| 男人的下面进女人的下面在线观看| 美女被插进去黄色| 久久噜噜噜久久熟女精品| 美女大骚逼幸福遍穴| 校花内射国产麻豆欧美一区| 偷窥国内肥臀老熟女视频| 国产精品亚洲一区二区三区下载| 极品一区二区三区av| 大肌巴日小个子女人视频| 色老头av亚洲三区三区| 中文字幕一高清免费视频| 无码毛片一区二区本码视频| 国产乱色国产精品免费播放| 人妻在线系列一区二区三| 日本不卡高清视频在线播放| 国产乱精品一区二区三区视频了| 鸡巴插骚逼真舒服| 国产精品久久一区二区三区夜色| 欧美大胆a级视频 一本| 欧美日韩精品视频在线第一区| 韩国精品视频一区二区在线观看| 老司机免费福利午夜入口| 中文字幕精品字幕一区二区三区| A级毛片毛片免费观看久| 国产一二三四五自产| 2021国产精品自在自线| 中文字幕av一区二区三区蜜桃| 免费女人男人肏逼| 亚洲一区二区女同性恋免费看| 日韩欧美视频在线观看不卡| 干美妞肛门在线播放| 被公侵犯人妻少妇一区二区三区| 精品一区二区视频在线观看| 白嫩在线亚洲观看| 泡芙啪啪啪黄色污污| 亚洲男性天堂一区二区三区| 天天躁久久躁中文字字幕| 欧美人人做人人爽人人喊| 日韩av大片一区二区三区|