欧美人妻精品一区二区三区99,中文字幕日韩精品内射,精品国产综合成人亚洲区,久久香蕉国产线熟妇人妻

5 things about carbide progressive die 1
The progressive die is composed of multiple stations. Each station is connected in sequence to complete different processes. A series of different stamping processes are completed in one stroke of the press.

1.Overview

Progressive die (also called continuous die) is composed of multiple stations. Each station is connected in sequence to complete different processes. A series of different stamping processes are performed in one stroke of the press. After one stroke is completed, the material is moved forward by the punch feeder at a fixed step, so that multiple processes can be completed on a pair of dies, such as punching, blanking, bending, trimming, and deep drawing. and many more.

2. Features

(1)Progressive die is a multi-task sequence die, in a pair of molds, can include punching, bending and stretching and other multi-channel processes, with high productivity;
(2)Progressive die operation safety;
(3)Easy to automate;
(4)can use high-speed punch production;
(5)Can reduce the punch, site area, reduce the transport of semi-finished products and warehouse occupancy;
(6)The parts with extremely high dimensions are not suitable for the production of progressive die.

3. Requirments

(1)The part is small;
(2)Large volume;
(3)The material is thin (0.08~2.5mm);
(4) The material is soft;
(5) The shape is more complicated;
(6) The precious metal is not suitable (low utilization rate);
(7) The accuracy is too high (IT10 level below).

4. Differences of different models

Engineering model: Also called “single process model”, it refers to a mold that can only complete one stamping process in one stroke of stamping. After this project is finished, it is necessary to remove the product from the mold manually or with a robot, and then put it into the next mold to continue production until the last process of the mold is finished and the entire product is completed. This kind of mold is simple to repair, but it takes time and labor to produce, requires more labor and time, and has a higher scrap rate.
Compound mold: Common compound mold structure has compound cutting, compound drawing, etc. This kind of mold structure is slightly different from other engineering mold structures. The punch (also known as the male mold or punch) is designed in the lower mold, and the other several mold plates are the lower clamp plate (fixed punch punch), the lower stop plate and the lower stripper plate (outside release). The upper mold sequentially It is composed of a female mold (or knife-edge), an inner release plate and an upper backing plate, and the inner sleeve is hung on the upper backing plate with a contour sleeve, and is then pushed with a lever or a spring. For example, the composite mold used for blanking can be removed within 0.50 mm of the master mold. It must not be lower than the master mold, otherwise the mother mold edge can easily collapse or not be removed. The strength of the inner release should be large enough to lift the product out of the master mold.
Continuous die: also known as “progressive die”, refers to the die that completes two or more punching operations at the same time in the stamping process. This die is difficult to repair and requires experience. A wealth of fitter masters operate, but they are very efficient to produce. If they are fast, they can produce thousands of products in an hour, save labor and time, and have a lower scrap rate.

5. Points of design

The design of the main parts of the mold should pay attention to the following points:
(1) Punch design
The fixing of the punch die adopts the common form of the progressive die. The clearance between the punch and the punch fixing plate is 0.06mm. All the punches are pressed on the punch fixing plate by the punch press plate. The design of the punch press plate protrudes from the bottom of the punch die to increase the strength of the punch die, and the pull-off phenomenon of the punch die is avoided on the basis rate. In order to ensure that the punch has good rigidity, the length of the punch is designed to be 60mm (the length of the individual circular punch is designed to be 52mm).
(2) Die Design
In order to facilitate the manufacture of the concave mold, the concave mold adopts a mosaic structure, and all the concave molds and the concave mold fixed and used 0005mm clearance. Axially fixed are used pressure plate or guide plate with the same set. This not only facilitates the removal of the die, X can prevent lL mold punching when the die insert is brought out of the die fixed pull phenomenon. Because the stamping sheet is softer. The scrap ejected from the mold may have a small rebound, and the main failure mode of the die is plugging. The die edge is designed to be in the form of a 2mm straight wall with a slant of material.
(3) Discharging structure
The design of the discharge structure mainly includes the discharge of round holes, the discharge of punch holes, and the discharge of shaped materials. In order to ensure that the stripper plate plays a role in the precision guiding of the punching punch, the matching gap between the two is 0012 ram; in order to improve the processing degree of the stripper plate and prevent deformation. The stripper plate is divided into two parts; the lower die of the mold is designed with burr edge inserts and embossing mold inserts, the height of which is higher than the upper plane of the die; the stripper plate is designed with a strip groove, so as to ensure that the cross-section is not damaged Mold parts. .

???? ???????

?? ??? ??? ????? ????? ??????????. ?????? ????????? ???? ????? ?? *

男人的下面进女人的下面在线观看| 青青河边草直播免费观看| 欧美国产综合日韩一区二区| 成人高清在线播放一区二区三区| 最是人间烟火色在线播放| aaa啊啊啊黄片| 玖玖资源站无码专区| 少妇精品久久久一区二区免费| 精品人妻少妇一区二区三区不卡| 亚洲波多野结衣日韩在线| 大胸美女被c的嗷嗷叫视频| 伊人网在线视频观看| 日韩欧美一区二三区风间由美| 欧美日韩一区精品一区精品| 一区二中文字幕在线看国产一区| 亚洲二亚洲欧美一区vr| 国产精品久久一区二区三区夜色| 在线 中文字幕 第一页| 欧美一区二区三区身体| 国产三级精品久久久久| 日本精品久久人妻一区二区三区| 日韩午夜资源在线观看| 非洲大鸡巴操逼黄色录像| 鸡巴插进女人的逼里| 操女人逼逼骚逼逼| 中文无码av动作片| 奇米一区二区三区视频在线观看| 视频一区二区三区日韩视频| 国产天美传媒剧免费观看| 操美女干逼调教捆绑视频| 咪咪爱一级特黄大片| 中文字幕 av一区二区| 欧美 日韩 亚洲 熟女| 欧美区 日韩区 亚洲区| 鸡巴插骚逼真舒服| 欧美亚洲综合一区二区三区| 女人被男人操到高潮视频| 日韩毛片一区视频免费在线观看| 老太太在丛林日老B| 国产精品你懂的在线资源| 男生鸡鸡插进女生笑穴里|